

Hanwha Vision (Wisenet) | QNV-6012R
Ideal for deployment in outdoor areas the require 24-hour monitoring, this vandal-resistant unit features integrated IR LEDs and a range of imaging technologies to provide clearer images in any lighting conditions.
This vandal-resistant dome IP camera is part of the Hanwha Vision ‘Q’ series and delivers HD 1080p resolution video at up to 25 frames per second (fps). Useful features include WDR technology and integrated infrared (IR) LEDs, which can enhance night vision at a range of up to 25m to help provide clear, round-the-clock imaging of outdoor scenes.
True day/night recording is enhanced by integrated IR illumination at a range of up to 25m and with a horizontal viewing angle of 88°, the unit can monitor wide outdoor areas. A microphone (not included) can also be connected through the audio I/O port to enable one-way audio recording of sounds within close proximity to the camera.
A handful of imaging technologies are included to improve the quality of images captured in challenging lighting conditions. WDR retains image details across images with high contrast lighting and, thanks to the Wisenet Hallway View, areas of interest are maximised in narrow scenes by vertically orienting the video stream.
Configurable camera-based video motion detection and tampering alarms help to alert users of activity through a variety of notification methods, including email.
Recordings can be stored locally to the on-board MicroSD card (not included) and used as a backup if the network fails. Users can also remotely access the unit via the free Wisenet Viewer application and, for more sophisticated video management, the camera can be integrated with Wisenet WAVE or Milestone XProtect video management software.
With its IP66 and IK10-rated housing, this camera is suited to deployment in exposed outdoor areas. Support for Power over Ethernet (PoE) also simplifies installation and cuts initial costs by providing both power and network connectivity over one cable.
With integrated IR illumination, the Hanwha Vision QNV-6022R is ideal for deployment in outdoor areas that require unobtrusive, 24-hour surveillance such as car parks, airports and community centres.
Camera |
||
Environment: | outdoor (IP66 and IK10-rated) | |
Type: | fixed dome | |
Sensor: | 1/2.8” 2MP CMOS | |
Lens: | fixed, 4mm, horizontal field of view: 88° | |
Audio: | one-way, line in, G.711 u-law/G.726 selectable, G.726(ADPCM) 8KHz, G.711 8KHz, G.726: 16Kbps, 24Kbps, 32Kbps, 40Kbps | |
Power: | Power-over-Ethernet IEEE 802.3af/802.3at Class 3, typical: 6W, max: 7.4W | |
Memory: | 512MB RAM, 256MB Flash | |
Video |
||
Resolution: | 1920 x 1080 (HD 1080p) | |
Compression: | H.265/H.264 Main and High profiles, MJPEG | |
Frame-rate: | 30 fps | |
Bandwidth control: | H.264/H.265: CBR or VBR, MJPEG: VBR, WiseStream II | |
Day/night: | automatically removable infrared-cut filter | |
Minimum illumination: | colour: 0.03 lux, b/w: 0 lux (IR LED on), IR illumination: 25m | |
Digital zoom/PTZ | no | |
Video overlay: | text and image | |
Imaging: | WDR, digital noise reduction, white balance, hallway view, flip, mirror |
|
Viewing, detection & recording |
||
Privacy masking: | yes | |
Number of users: | up to 6 | |
External alarm inputs and outputs | none | |
Alarm detection: | Video Motion Detection, tampering alarm, defocus detection, virtual line, enter/exit, alarm input |
|
Alarm action: | notification: email, HTTP, HTTPS and TCP and SNMP trap, video recording to edge storage and network share, send video clip, overlay text | |
Pre-/post-alarm buffer: | none | |
On-camera recording: | Micro SD/SDHC/SDXC 1slot | |
Recording software supported: | Wisenet Viewer, Milestone XProtect | |
Connections |
||
Power: | Power over Ethernet IEEE 802.3af/802.3at Class 3 | |
Network: | RJ45 (10/100 BASE-T) max. 7.4W | |
Alarm I/O | 1 input, 1 output |
Other |
Dimensions: | Ø120.3mm x 91.7mm | |
Weight: | 0.51kg | |
Casing: | colour: white, IP66-rated, IK10-rated, aluminium | |
Warranty: | 5 year | |
Mounting methods: | ceiling, wall | |
Operating temperatures: | -30°C to 55°C | |
Power consumption: | max. 7.4W | |
Dynamic DNS: | yes | |
Protocols supported: | IPv4, IPv6, TCP/IP, UDP/IP, RTP(UDP), RTP(TCP), RTCP, RTSP, NTP, HTTP, HTTPS, SSL/TLS, DHCP, FTP, SMTP, ICMP, IGMP, SNMPv1/v2c/v3(MIB-2), ARP, DNS, DDNS, QoS, UPnP, Bonjour, LLDP |
|
QoS: | yes | |
Security: | HTTPS(SSL) Login Authentication, Digest Login Authentication, IP Address Filtering, User access log, 802.1X Authentication(EAP-TLS, EAP-LEAP) | |
ONVIF compliant: | yes, profiles S, G and T |