Axis Communications | 02861-001

Axis A9210 network I/O relay module with 10 I/O ports, 1 form C wet or dry relay, PoE support and Axis Edge Vault

€327.98

€393.58 inc VAT

Free delivery on mainland UK and most EU countries. Check delivery charges to where you are.

Relay module allowing the extension of functionality from Axis devices, including inputs from cameras, analytics, environmental sensors and more. It features 10 I/O ports including 2 configurable I/Os, 5 inputs, 3 outputs and 1 form C relay output.

10 I/O ports
1 form C relay, wet or dry
Add up to 16 I/O expansion modules
Supports up to 128 I/Os and 64 relays with a single IP connection
Axis Edge Vault safeguards the device
Axis 5-year warranty, firmware support until 31-12-31

More details

Overview of the Axis A9210 network I/O relay module

Extends the functionality of Axis and third-party devices
10 I/O ports, including 2 configurable I/Os, 5 inputs, 3 outputs and 1 form C relay output
Supports up to 16 expansion modules for up to 128 I/Os and 64 relays
Powered over a single PoE connection
Based on Axis open platforms such as ACAP and VAPIX support

This relay module allows the extension of functionality of Axis and third-party devices, enabling enhanced capabilities within your network-based security system. Featuring 10 I/O ports, you can utilise inputs from cameras, analytics, alarm buttons, audio devices and environmental sensors to trigger a range of external devices such as PTZ cameras, lights, alarms or doors. Built on an open platform, this scalable module is simple to integrate. With support for up to 16 expansion modules, a total of 128 I/Os and 64 relays can be used all through a single PoE connection making for cost-efficient installation.

Recording and Video Management

Recording and video management platforms which will integrate this module:

Example Use Cases

Analytics - Trigger external devices including visual alarms on event detection such as unauthorised area access
ANPR gate control - Input from a camera supporting licence plate recognition can lift a gate, barrier, turnstile upon detection
Emergency trigger - Activate audible alarms upon pressing of emergency and panic buttons
Temperature monitoring - Modbus sensor integrates with environmental sensors including temperature and humidity

Accessories included

I/O module
Installation guide
Connector kit (mounted)
Grounding kit

Key technical features of the Axis A9210 network I/O relay module

Network I/O Module
Environment:	indoor
Configurable I/Os:	I/O: 2x I/O (I/O 1, I/O 2), configurable inputs or outputs Digital input: 0 to max 30 V DC, possible to supervise between 0–12 V (4 states) Programmable end-of-line resistors, 1 K, 2.2 K, 4.7 K and 10 K, 1%, ¼ watt standard Digital output: Open drain, 0 to max 30 V DC, max 100 mA Power out I/O: 1x 12 V DC output, max 50 mA
Inputs:	5x input (I 1, I 2, I 3, I 4, I 5) 0 to max 30 V DC, possible to supervise between 0–12 V (4 states) Programmable end-of-line resistors, 1 K, 2.2 K, 4.7 K and 10 K, 1 %, ¼ watt standard
Outputs:	3x output (O 1, O 2, O 3) Open drain, max 30 V, 100 mA each
Relays:	1x form C relay, NO/NC, max 2 A, max 30 V DC Power out relay: 12/24 V DC, max 24 W With PoE: max 350 mA at 12 V DC, max 150 mA at 24 V DC, max 4.5 W With PoE+: max 1100 mA at 12 V DC, max 500 mA at 24 V DC, max 14 W With DC in: max 2000 mA at 12 V DC, max 1000 mA at 24 V DC, max 24 W
RS485:	1x port, half duplex, Modbusd Power out RS485: 1x 12 V DC output, default 200 mA (490 mA hardware verified by UL 294)
Power:	Power in: 12 V DC, max 36 W, or Power over Ethernet (PoE) IEEE 802.3at, Type 2 Class 4
General
Dimensions:	137.5mm x 31.3mm x 102.8mm
Weight:	466g (1lb)
Casing:	Steel Colour: white NCS S 1002-B
Operating temperatures:	-40 °C to 55 °C (-40 °F to 131 °F) Conditional maximum temperature : 70 °C (158 °F) UL 294: 0 °C to 55 °C (32 °F to 131 °F) Humidity: 10–85% RH (non-condensing)
Installation aids:	Pixel counter, remote zoom and focus, level grid
Warranty:	5-year
Firmware support to:	31-12-2031
Protocols supported:	IPv4, IPv6, HTTP, HTTPSb , TLSb , QoS Layer 3 DiffServ, SMTP, mDNS (Bonjour), UPnP® , SNMP v1/v2c/v3 (MIB-II), DNS/DNSv6, DDNS, NTP, RTSP, RTCP, RTP, TCP, UDP, IGMPv1/v2/v3, DHCPv4/v6, SOCKS, SSH, MQTT v3.1.1, Syslog
Security:	Software: Signed firmware, brute force delay protection, digest authentication, password protection Hardware: Axis Edge Vault cybersecurity platform Secure element (CC EAL 6+), Axis device ID, secure keystore, secure boot, encrypted filesystem (AES-XTS-Plain64 256bit