Skip to main content
Zoom the image with the mouse

| S14D-SET3

Mobotix S14D-SEC-SET3 outdoor day/night IP camera with 3-megapixel 360 degree hemispheric FlexMount lens modules

Free delivery on mainland UK and most EU countries. Check delivery charges to where you are.
Hurry! Only left

This product has now been discontinued and replaced by the Mobotix S15D-SEC.

Overview of the Mobotix S14D-SEC-SET3

This kit includes Mobotix' S14D-SEC FlexMount network camera with two sensor modules; a 3-megapixel colour module for daytime surveillance and a 1.3 megapixel infrared-sensitive monochrome module for low-light monitoring, even in darkness when used with infrared lighting. Each hemispheric lens captures a 360° view, covering all angles at once and eliminating blind spots.

Both sensor modules are compact in design and can be mounted up to 2m away from the camera body, with audio captured at each location using the integrated microphone. The combined 4.3-megapixel resolution captures sharp detail, and with 15° "SlopeMount" brackets, the camera lens modules can be angled down to capture footage from above.

With IP66-rating, the camera is suitable for outdoor use without risk of damage. Video can also be recorded internally onto the pre-installed 4GB MicroSD memory card (upgradable to 64GB) or to local NAS drives. Mobotix' video management software MxControl Centre is available free-of-charge, allowing systems to be monitored and managed efficiently.

Please note: This camera does not come with a power supply. Should you require a Power over Ethernet midspan, please select one from the options above.

Key features & benefits of the Mobotix S14D-SEC-SET3

  • All-round vision - capture an entire room at once with 360° hemispheric views
  • Day/night switching - the camera is supplied with both a colour and infrared-sensitive monochrome lens modules
  • Unobtrusive surveillance - monitor areas without attracting unwanted attention
  • FlexMount technology - both lens modules can be installed at different locations and viewing angles
  • 4.3-Megapixel total resolution - easily recognise subjects even at a distance
  • Distortion correction - ensure that images in view are true to life
  • In-built recording system - record video to networked storage or to MicroSD card (4GB pre-installed)
  • IP65-rated - suitable for outdoor use
  • 2-way audio with built-in microphone - listen to sound captured at each of the lens module locations

Typical applications for the Mobotix S14D-SEC-SET3

With FlexMount hemispheric day and night lens modules, this camera is unique in its ability to monitor one area with colour footage and another with infrared-sensitive, low-light video. It is suited to many areas including monitoring of industrial sites, production and manufacturing lines, building entrances, or anywhere where separate but adjacent dark and bright areas require surveillance. Additionally, the two lens modules can be mounted close together for non-invasive 24-hour hemispheric surveillance in a range of environments.

Included accessories for the Mobotix S14D-SEC-SET3

  • 2x 360° sensor modules L11 (1x day, 1x night)
  • 2x 2m sensor cables
  • 2x 40mm extensions for lens module
  • 15° SlopeMount angle brackets
  • 0.5m patch cable
  • 2x Replacement domes
  • Mounting parts
  • Allen wrench
  • 4GB MicroSD card (pre-installed)

Optional (please select from above drop down menu if required):

Back To Top

Key technical features for the Mobotix S14D-SEC-SET3

Environment: Outdoor-ready (IP65)
Type: 2x 360° hemispheric lens camera
Sensor: 1x 3-megapixel and 1x 1.3-megapixel CMOS sensors
Lens: 2x L11 360° lens module
Audio: 2-Way audio with integrated microphone in each lens module
Power: IEEE802.3af Power over Ethernet
Compatibility: Compatible with Internet Explorer, Firefox, Chrome and Safari in Windows, Linux and Mac
Resolution: Per sensor: 2048x1536 (colour only), 1280x960, 1024x768, 800x600, 768x576, 704x576, 640x480, 384x288, 320x240 and 160x120. Other resolutions available through cropping
Compression: MxPEG and MJPEG
Frame-rate: 20fps @ 2048x1536. 30fps @ 1280x960 and below
Day/night: 1x Day module and 1x night module
Minimum illumination: Colour: 1 lux. Monochrome: 0.1 lux (t=1/60s)
Digital zoom/PTZ: Browser-controlled digital pan-tilt-zoom
Video overlay: Text and image overlay
Viewing, detection & recording
Multi-camera viewing: Up to 16 cameras
Privacy masking: Yes
Alarm detection: Motion detection, external signals, temperature sensor, microphone and shock detector
Intelligent video: Logic-based event triggering
External alarm inputs and outputs:Available using I/O module connected via MxBus (available separately)
Alarm notifications: Email, FTP, IP telephony and visual/acoustic alarms
Recording triggers: Alarm and continuous
On-camera recording: 4GB MicroSD memory card pre-installed (upgradable to 64GB)
Compatible recording platforms (not included)
Software: Milestone XProtect
Power: PoE only
Network: 10/100Mbps RJ-45 Ethernet connection with PoE support
Alarm I/O: MxBus
Audio: Integrated microphone. Screw terminals for speaker/microphone
Other: MiniUSB
Dimensions: Camera body: 115mm x 130mm x 33mm. Lens modules: °50mm x 33.4mm
Weight: Camera body: 444g. Lens module: 91g
Colour: White
Warranty: 2-Year manufacturer's warranty
Mounting methods: lens modules can be mounted into false walls
Operating temperatures:–30 to 60°C
Power consumption: Around 4.5W
Dynamic DNS: Yes
QoS: No
Security: HTTPS/SSL, IP-level access control and network authentication IEEE 802.1X
System integration: HTTP API available
ONVIF compliant: No
We're here to assist you
Speak to one of our experts, call us on 0151 633 2111