Skip to main content
Zoom the image with the mouse
Watch Product Video

| 0871-001

Axis A8105-E network door station with HD 1080p, built-in microphone and speaker, remote entry control and edge storage

€1,046.77 inc VAT
Free delivery on mainland UK and most EU countries. Check delivery charges to where you are.

This network video door station offers intercom style communication, remote entry control and security monitoring. Ideal for entrance ways, the combination of high-quality imaging and full duplex audio creates an advanced intercom system.

  • HD 1080p resolution
  • Fixed lens: 180° viewing angle
  • 2-way audio via microphone and speaker
  • Open interface for third-party software
  • Forensic WDR renders image details evenly
  • Axis 5-year warranty
Options available:
Hurry! Only left

Overview of the Axis A8105-E

This compact unit by Axis is an open IP-based door station that enables intercom-style communication, remote door entry and security surveillance – all from a single device. It includes an integrated network camera which features HD 1080p capability and a handful of advanced imaging technologies to enable clear visual identification of persons. The unit also offers support for two-way audio, Power-over-Ethernet (PoE) and remote access via a mobile device.

The built-in IP camera captures high-quality HD 1080p video at full frame rate and provides a wide horizontal view of 180°. Wide Dynamic Range (WDR) - Forensic Capture is also supported, enabling details in scenes with bright and dark areas to be viewed clearly. In addition, Axis’ Digital Corridor Format helps to maximise the area of interest in narrow scenes by vertically orientating the video stream. Identification is enhanced with the built-in microphone and speaker, providing echo-free two-way audio support. This combination of high-quality imaging and full duplex audio results in an advanced intercom system - allowing users to easily see and communicate with visitors.

The door station features an open interface, allowing helpful integration with third-party video management software and other applications. This provides users with the flexibility to add both communication and entry control into their surveillance system – helping to improve overall security. The unit also supports Axis Camera Station and remote access via mobile applications.

Session Initiation Protocol (SIP) is supported for integration with various IP phone systems to help meet advanced audio and video communication requirements. Multiple I/O ports are also included for the remote control of door locks and other equipment to help improve access control.

Configurable, video motion and audio detection alarms help to alert users of activity via a choice of notification methods including email. These detection alarms can also be set to trigger local recording onto the on-board MicroSD card (not included).

Axis Zipstream technology analyses and optimises the video stream in real-time, recording important details in high quality, whilst filtering out other areas to help reduce bandwidth and storage use. Helpful support for PoE allows both power and network connectivity to be supplied to the door station over a single cable - simplifying installation.

Please note: there is no power supply included with this unit. It is power over ethernet capable.

Key features & benefits

  • Built-in IP camera delivers HD 1080p resolution at 25 fps, providing high-quality CCTV footage
  • WDR - Forensic Capture technology improves image quality in scenes with high-contrast lighting
  • Built-in microphone and speaker offer two-way audio support for communication between user and scene
  • IK08-rated housing allows for safe deployment in exposed locations
  • Open interface for integration with third-party software, for flexible use with a wide range of video management software
  • Session Initiation Protocol (SIP) is supported - enabling easy integration with IP network systems
  • Multiple I/O ports for remote control of door locks and other equipment
  • Axis’ Zipstream technology optimises the video stream in real-time, lowering bandwidth and storage levels by up to 50%
  • Enhanced scene awareness with configurable video motion and audio detection alarms
  • MicroSD card storage provides a data backup in the event of network failure
  • PoE provides enough power to support standard door-locks to enable remote entry from a mobile device or a PC
  • Out-of-the-box wall mount capabilities

Typical applications

The Axis A8105-E network video door station is a handy piece of kit that will complement any surveillance system – offering intercom-style communication, remote entry control and security monitoring. It’s an ideal choice for entranceways that require high levels of surveillance such as office buildings, loading bays and private car parks.



  • Installation guide
  • Resitorx T20 bit
  • Terminal block connector
  • Cable gasket
  • Axis Connector guard A
  • AVHS Authentication key


  • MicroSD card
  • PoE midspan

Mounting options 

  • Wall mounting - accessories included
  • Flush mounting - Axis A8105-E
Back To Top

Key technical features of the Axis A8105-E

Door Station

Environment: IP65- and NEMA 4X-rated
Type: fixed
Sensor: 1/2.8” progressive scan CMOS
Lens: 1.56mm, F2.8, horizontal angle of view: 180°, fixed focus, IR corrected
PTZ: digital PTZ
Memory: 256 MB RAM, 128 MB Flash
Power: power out: 1 x 12 V DC, Max. out: 350 mA at 12 V DC relay: see lock control, Power over Ethernet IEEE 802.3af/802.3at Type 1 Class 3
Audio: two-way, full duplex, echo cancellation, noise reduction, AAC-LC 8/16 kHz, G.711 PCM 8 kHz, G.726 ADPCM 8 kHz, OPUS (in SIP calls only), configurable bit rate, built-in microphone (can be disabled), built-in speaker 85dB


Resolution: (19200 x 1200) to (160 x 90)
Compression: H.264 (MPEG-4 Part 10/AVC), baseline Profile, main Profile, Motion JPEG
Frame-rate: capture modes: (1920 x 1200) 25fps (WDR), (1920 x 1200) 50 fps (no WDR)
Bandwidth control: multiple individually configurable streams, H.264, Motion JPEG, controllable frame rate and bandwidth, VBR/CBR H.264, Axis Zipstream technology in H.264
Video overlay: text and image
Day/night: not given
Minimum illumination: LED lit: 0 lux, LED unlit (with WDR): 2.23 lux, LED unlit (without WDR): 1.96 lux
Imaging: compression, colour, brightness, sharpness, contrast, white balance, exposure control, fine-tuning of behaviour at low light, WDR - Dynamic Capture, mirroring of images

Viewing, detection & recording

Privacy masking: yes
Number of users: not given
Alarm detection: video motion detection 3, active tampering alarm, audio detection, Axis Camera Application Platform enabling installation of additional applications, external input, edge storage events, shock detection
Alarm action: axis door control, video and audio recording to edge storage, external output activation, play audio clip, overlay text, PTZ control, status LED, WDR mode, make call: SIP, API, file upload via FTP, SFTP, HTTP, HTTPS network share and email, notification via email, HTTP, HTTPS and TCP
Pre-/post-alarm buffer: yes
On-camera recording: microSD/microSDHC/microSDXC slot supporting memory card up to 64 GB (card not included)
Direct-to-NAS storage: yes
Recording software included: video management software from Axis’ Application Development Partners (not included)


Network: RJ45 10BASE-T/100BASE-TX Ethernet interface with PoE
Audio: built-in microphone and speaker
Alarm I/O: 6-pin 3.81 mm terminal block
Video: not given
Dimensions: 147.5 (H) x 35 (D) x 48 (W)mm
Weight: 0.28kg
Warranty: 5 years
Mounting methods: wall or recessed mount available (not included)
Operating temperatures: -25 °C to 55 °C
Power consumption: not given
Dynamic DNS: yes
Protocols supported: IPv4/v6, HTTP, HTTPSa, SSL/TLSa, QoS Layer 3 DiffServ, FTP, CIFS/SMB, SMTP, Bonjour, UPnPTM, SNMP v1/v2c/v3 (MIB-II), DNS, DynDNS, NTP, RTSP, RTP, TCP, UDP, IGMP, RTCP, ICMP, DHCP, ARP, SOCKS, SIP, SIPS
QoS: yes
Security: user authentication, watermark, IP address filtering, anonymous access, reset
ONVIF compliant: yes

Frequently bought together with this product

We're here to assist you
Find out how we can help, call us on 0151 633 2111