Skip to main content

Specialist IP Camera Store Since 2004 - Supply, Install, Support

Zoom the image with the mouse

| VHW-HWPS-B8-LL

Veracity Highwire Powerstar (base unit), 8 channel Ethernet and PoE over coax unit with LinkLock

£1,128.00
£1,353.60 inc VAT
Free delivery on mainland UK and most EU countries Check delivery charges to where you are.
  • Secure connection via LINKLOCK technology
  • 8-channel base unit
  • Supports both standard and PoE+
Options available:
Hurry! Only left
 

Overview of the Veracity Highwire Powerstar VHW-HWPS-B8-LL (base unit)

 The Veracity VHW-HWPS-B8-LL is an 8-channel base unit that, when combined with Veracity VHW-HWPS-C client units, will allow users to power a total of eight IP cameras over existing coaxial cabling. It offers the same capabilities as the Highwire Powerstar Base 8, with the helpful addition of Veracity's LINKLOCK technology.

By constantly monitoring the Power-over-Ethernet (PoE) connection and data transmissions, LINKLOCK technology detects disconnection/reconnection or tampering throughout any part of the cabling between the Base unit and the IP camera. Suitable for externally mounted IP cameras, LINKLOCK will disconnect power and data per channel if any interruptions are detected - providing a secure barrier against unauthorised access into your network.

This unit provides a cost-effective and secure solution for delivering PoE - without the need for new cabling or a local power source. Requiring one main switch port or four network ports when rack-mounted, this unit is capable of delivering up to 200Mbit/s of bandwidth and power-over-coax at up to 300m (RG-59) or 500m (RG-11).

Please note: this device does not come with a power supply, please select from the dropdown menu if required.

Key features & benefits

  • Delivers video data and PoE/PoE+ to a maximum of eight connected IP devices via the co-axial video cable
  • LINKLOCK technology provides secure, tamper-proof network connections over coax
  • Automatically connects to a wide range of cameras with simplified configuration
  • Provides network connection up to a distance of 500m
  • Power is delivered through the network connection with no need for a local power source
  • Supports both standard and high Power-over-Ethernet

Typical applications

The Veracity Highwire Powerstar Base 8 LINKLOCK eight-channel base unit with LINKLOCK 'tamper-detection' can be used to replace legacy video encoders in medium to large CCTV systems - whilst allowing existing coax cabling to be kept.

 

Back To Top
 

Key technical features of the Veracity VHW-HWPS-B8-LL

Veracity Highwire Powerstar Base 8 LINKLOCK
Environment connector type: RJ45 with optional SFP socket for fibre
Highwire connector type: 8x BNC 75 Ohm
Power input: 57v DC, up to 6A via a 2-pin detachable scre terminal (supplied) or a 2-pin Micro-Fit power connector
Power output: IEEE 802.3af (PoE) or IEEE 802.3at (PoE Plus) up to 25W per channel
Range: up to 300m on RG59 or 500m RG11 at full rate
Bandwidth: 200 Mbps (total up + down) x 8
Power consumption: 10W rising to 20W under full PoE load
Dimensions: 173 (L) mm x 110 (W) mm x 40 (H) mm
Weight: 572g
Operating temperature: 0°C to 40°C 
Warranty: 5 years
We're here to assist you
Find out how we can help, call us on 0151 633 2111