This product is discontinued, for alterative models please see Wisenet IP Cameras
Overview
Part of LILIN's cost-effective L series, the LILIN LR7424 features a rugged IP66-rated casing and built-in infrared LEDs with 45m effective range, allowing the camera to be installed outdoors to illuminate large areas. The HD 1080p video captured by the camera is sharp and clear at a frame rate of 15fps, making it easy for operators to make identifications at a significant distance.
In addition to monochrome footage at night, the camera's switchable infrared-cut filter enables colour footage in daylight, while with wide dynamic range and 3D noise reduction built-in, the camera can adapt to a variety of harsh lighting environments.
The LR7424 can also cost-effectively store video feeds either to the internal MicroSD memory card or using the included CMX software. It has built-in two-way audio (speaker not included) and triggers based on audio detection if required.
Please note: This camera does not include a power supply. If you require a Power over Ethernet midspan, please select one from the options above.
Key features & benefits
- Infrared illumination - see events in the dark without external lighting, with illumination range of over 45m
- IP66-rated casing - the vandal-resistant camera is for mounting outdoors without the need for an additional housing
- True day/night switching - capture colour footage during the day and infrared-sensitive monochrome footage at night
- Two-way audio - the audio system can provide operators with feeds from around the camera, and trigger events when unexpected sounds are detected
- Included cable-managed bracket - the sturdy bracket protects vital camera cabling from malicious tampering and damage
- Noise reduction and wide dynamic range - improve visibility in a wide range of light conditions
- Bundled recording - record to MicroSD card or to Windows PCs using the included CMX software
- PoEPlus - power both the camera and the housing through a single data cable
Typical applications
This camera is suited to scenarios where high HD surveillance footage is required 24 hours a day and where long-range visibility is required - for example on site perimeters, school and college buildings, freight and haulage yards, industrial sites, corporate buildings and large car parks.
Compatible recording platforms
- LILIN NVR116 network video recorder, NVR104 and NVR109
- Milestone XProtect (using ONVIF driver)
- Compliant with all ONVIF compatible recorders
Included accessories
- Instruction manual
- Installation CD
- Hex key
- LILIN CMX recording software
Key technical features for the LILIN LR7424
Camera | |
| Environment: | Outdoors |
| Type: | Bullet camera |
| Sensor: | 1/2.5" CMOS image sensor |
| Lens: | 3.3-12mm (F1.4) lens with 59.6-22.6° field of view |
| Power: | 24V DC, PoE plus 802.3at |
| Processor/memory: | Embedded 528MHz SoC ARM11 processor with 256MB RAM and 256MB flash memory |
| Compatibility: | Windows 2000, XP, Vista and 7 using Internet Explorer 6 or above |
Video | |
| Resolution: | 1920x1080, 1280x720, 720x480 and 352x240 |
| Compression: | MJPEG and H.264 |
| Frame-rate: | 15fps @ 1920x1080, 30fps and lower resolutions |
| Bandwidth control: | Variable/constant bitrate H.264 |
| Day/night: | True day/night switching with built-in 45m infrared lighting |
| Minimum illumination: | 0.25 lux (F1.4). 0 lux with infrared lights on |
| Digital zoom/PTZ: | Digital zoom |
| Analogue video out: | 1V p-p 75 Ohm video |
| Video overlay: | Text, camera name and date/time overlay |
Viewing, detection & recording | |
| Multi-camera viewing: | Using included CMX software |
| Privacy masking: | Yes (4 zones) |
| Simultaneous users: | 8 |
| Alarm detection: | Motion detection, audio detection and external input |
| External alarm inputs and outputs: | 1x alarm input and 1x relay output |
| Alarm notifications: | Notification via FTP and Email |
| On-camera recording: | MicroSD recording for cards up to 32GB |
| Recording software included: | LILIN CMX with Windows-based recording for up to 72 cameras |
Compatible recording platforms (not included) | |
| Software: | Milestone XProtect (Using ONVIF driver) |
Connections | |
| Power: | Screw terminals for 24V AC |
| Network: | 10/100Mbps RJ-45 Ethernet port with High PoE support |
| Alarm I/O: | Screw terminals for external connections |
| Audio: | Screw terminals for audio connections |
| Analogue: | BNC port for use with installation tools |
Other | |
| Dimensions: | 109mm x 121.5mm x 231mm (camera only) |
| Weight: | 1.7kg |
| Warranty: | 3 year manufacturer's warranty |
| Mounting methods: | Wall-mountable using the included bracket |
| Operating temperatures: | -35 to 50°C |
| Power consumption: | 24V: 14W. High PoE: 16W |
| Dynamic DNS: | Yes |
| Protocols supported: | IP, TCP, UDP, HTTP, SMTP, NTP, DDNS, UPnP, FTP, ARP, DHCP, PPPoE, DNS, RTSP, RTCP, Telnet, ONVIF, ICMP and IGMP |
| QoS: | No |
| Security: | Multiple user access levels with password protection |
| System integration: | LILIN HTTP API |
| ONVIF compliant: | Yes |

