This product is discontinued, for alterative models please see Wisenet IP Cameras
Overview of the LILIN IPR434ESX
This cost-effective outdoor security camera from LILIN features full HD and 3.27 megapixel image resolution, built-in infrared lighting with 45m range, a removable IR-cut filter and a fully cable-managed housing. It performs excellently in both daytime and at night and with LILIN's SenseUp+ fuction maintains colour output in the tricky low light twilight between full light and total darkness. Its IP66-rated outer casing protects the camera from the weather and includes a cable-managed wall-mount bracket for safe, easy mounting.
With 3-megapixel resolution, video is extremely detailed with ample pixel data for digital pan, tilt and zooming. LILIN's on-board SenseUp Plus technology increases the camera's sensitivity to light. As a result this reduces the need for external lighting and preserves the colour detail in low-light to make identification of subjects much easier. The face detection system can differentiate between human faces and random motion so that detection/false alarm ratios are made more accurate than conventional video motion detection.
Please note: This camera comes with a choice of 3.3-12mm lens or 9-22mm lens. Please make your selection above when adding the camera to your cart. Additionally, this camera does not include a power supply. If you require a Power over Ethernet midspan, please select one from the options above.
Key features
- 55m infrared night vision - the built-in infrared LEDs inoffensively illuminate objects up to 45m away
- Outdoor-ready housing with cable-managed bracket
- SenseUp Plus technology - capture colour detail in tricky near-dark conditions
- Face / tampering detection - trigger actions when faces are detected in view or when the camera is tampered with
- True day/night switching - capture colour video during the day and monochrome footage with increased light sensitivity at night
- 2-way audio - deter or challenge intruders or offer assistance to subjects in view by speaking interactively through the camera
- High PoE support
Typical applications
This camera is suited to 24-hour outdoor surveillance requirements where long-distance surveillance is needed in areas with little to no lighting.
Compatible recording platforms
- LILIN NVR116 network video recorder, NVR104 and NVR109
- Milestone XProtect (using ONVIF driver)
- Compliant with all ONVIF compatible recorders
Included accessories
- Camera with outdoor-ready housing and cable-managed bracket
- Instruction manual
- Setup CD
- Hex key
- 1/4" screws
- LILIN CMX recording software
Key technical features for the LILIN IPR434ESX
Camera | |
| Environment: | Outdoor-ready |
| Type: | Fixed camera |
| Sensor: | 1/2.8" CMOS image sensor |
| Lens: | Selectable above: 3.3-12mm (F1.4) varifocal lens with 79.3-29.8° horizontal viewing angle or 9-22mm (F1.6) varifocal lens with 35-15° horizontal viewing angle |
| Audio: | 2-way audio using G.711 compression |
| Power: | 24V AC or IEEE802.3at High Power over Ethernet |
| Processor/memory: | Embedded 528MHz SoC ARM11 processor with 256MB RAM and 256MB flash memory |
| Compatibility: | Windows 2000, XP, Vista and 7 using Internet Explorer 6 or above |
Video | |
| Resolution: | 2048x1536, 1920x1080, 1280x720, 720x480 and 352x240 |
| Compression: | H.264 and MJPEG |
| Frame-rate: | 15fps @ 2048x1536. 30fps below |
| Day/night: | True day/night with switchable infrared-cut filter and 55m infrared illumination |
| Minimum illumination: | 0.15 lux (F1.4, night mode). 0 lux with on-board illumination |
| Digital zoom/PTZ: | Full digital pan, tilt and zoom with Region of Interest (RoI) |
| Video overlay: | Text, camera name and date/time overlay |
| Analogue video out: | 75 Ohm (1V p-p) |
Viewing, detection & recording | |
| Privacy masking: | Yes (4 zones) |
| Simultaneous users: | 8 |
| Alarm detection: | Motion, audio, tampering and face detection |
| Alarm notifications: | Image upload via FTP and email |
| On-camera recording: | SD/SDHC cards up to 32GB |
| Recording software included: | LILIN CMX software for up to 72 cameras |
Compatible recording platforms (not included) | |
| Software: | Milestone XProtect (Using ONVIF driver) |
Connections | |
| Power: | Terminal connections for 24V AC |
| Network: | 10/100Mbps RJ-45 Ethernet connection with High PoE support |
| Alarm I/O: | Terminal connections for 1x alarm input and 1x relay output (N.O.) |
| Audio: | Terminal connections for audio input and output |
| Analogue: | BNC connection |
Other | |
| Dimensions: | 112mm x 100mm x 307mm (housing with sunshield) |
| Weight: | 2.2kg |
| Warranty: | 3 year manufacturer's warranty |
| Mounting methods: | Wall-mountable |
| Operating temperatures: | -35 to 50°C |
| Power consumption: | 24V AC: 17W. High PoE: 20W |
| Dynamic DNS: | Yes |
| Protocols supported: | IP, TCP, UDP, HTTP, SMTP, NTP, DDNS, UPnP, FTP, ARP, DHCP, PPPoE, DNS, RTSP, RTCP, Telnet, ONVIF, ICMP and IGMP |
| QoS: | No |
| Security: | Multiple user access levels with password protection |
| System integration: | LILIN HTTP API |
| ONVIF compliant: | Yes |

