Merit LILIN | IPR434ESX
LILIN IPR434ESX outdoor 3MP network camera with 45m infrared night vision, SenseUp Plus and face detection, HPoE
This product is discontinued, for alterative models please see Wisenet IP Cameras
Overview of the LILIN IPR434ESX
This cost-effective outdoor security camera from LILIN features full HD and 3.27 megapixel image resolution, built-in infrared lighting with 45m range, a removable IR-cut filter and a fully cable-managed housing. It performs excellently in both daytime and at night and with LILIN's SenseUp+ fuction maintains colour output in the tricky low light twilight between full light and total darkness. Its IP66-rated outer casing protects the camera from the weather and includes a cable-managed wall-mount bracket for safe, easy mounting.
With 3-megapixel resolution, video is extremely detailed with ample pixel data for digital pan, tilt and zooming. LILIN's on-board SenseUp Plus technology increases the camera's sensitivity to light. As a result this reduces the need for external lighting and preserves the colour detail in low-light to make identification of subjects much easier. The face detection system can differentiate between human faces and random motion so that detection/false alarm ratios are made more accurate than conventional video motion detection.
Please note: This camera comes with a choice of 3.3-12mm lens or 9-22mm lens. Please make your selection above when adding the camera to your cart. Additionally, this camera does not include a power supply. If you require a Power over Ethernet midspan, please select one from the options above.
Key features
- 55m infrared night vision - the built-in infrared LEDs inoffensively illuminate objects up to 45m away
- Outdoor-ready housing with cable-managed bracket
- SenseUp Plus technology - capture colour detail in tricky near-dark conditions
- Face / tampering detection - trigger actions when faces are detected in view or when the camera is tampered with
- True day/night switching - capture colour video during the day and monochrome footage with increased light sensitivity at night
- 2-way audio - deter or challenge intruders or offer assistance to subjects in view by speaking interactively through the camera
- High PoE support
Typical applications
This camera is suited to 24-hour outdoor surveillance requirements where long-distance surveillance is needed in areas with little to no lighting.
Compatible recording platforms
- LILIN NVR116 network video recorder, NVR104 and NVR109
- Milestone XProtect (using ONVIF driver)
- Compliant with all ONVIF compatible recorders
Included accessories
- Camera with outdoor-ready housing and cable-managed bracket
- Instruction manual
- Setup CD
- Hex key
- 1/4" screws
- LILIN CMX recording software
Key technical features for the LILIN IPR434ESX
Camera | |
Environment: | Outdoor-ready |
Type: | Fixed camera |
Sensor: | 1/2.8" CMOS image sensor |
Lens: | Selectable above: 3.3-12mm (F1.4) varifocal lens with 79.3-29.8° horizontal viewing angle or 9-22mm (F1.6) varifocal lens with 35-15° horizontal viewing angle |
Audio: | 2-way audio using G.711 compression |
Power: | 24V AC or IEEE802.3at High Power over Ethernet |
Processor/memory: | Embedded 528MHz SoC ARM11 processor with 256MB RAM and 256MB flash memory |
Compatibility: | Windows 2000, XP, Vista and 7 using Internet Explorer 6 or above |
Video | |
Resolution: | 2048x1536, 1920x1080, 1280x720, 720x480 and 352x240 |
Compression: | H.264 and MJPEG |
Frame-rate: | 15fps @ 2048x1536. 30fps below |
Day/night: | True day/night with switchable infrared-cut filter and 55m infrared illumination |
Minimum illumination: | 0.15 lux (F1.4, night mode). 0 lux with on-board illumination |
Digital zoom/PTZ: | Full digital pan, tilt and zoom with Region of Interest (RoI) |
Video overlay: | Text, camera name and date/time overlay |
Analogue video out: | 75 Ohm (1V p-p) |
Viewing, detection & recording | |
Privacy masking: | Yes (4 zones) |
Simultaneous users: | 8 |
Alarm detection: | Motion, audio, tampering and face detection |
Alarm notifications: | Image upload via FTP and email |
On-camera recording: | SD/SDHC cards up to 32GB |
Recording software included: | LILIN CMX software for up to 72 cameras |
Compatible recording platforms (not included) | |
Software: | Milestone XProtect (Using ONVIF driver) |
Connections | |
Power: | Terminal connections for 24V AC |
Network: | 10/100Mbps RJ-45 Ethernet connection with High PoE support |
Alarm I/O: | Terminal connections for 1x alarm input and 1x relay output (N.O.) |
Audio: | Terminal connections for audio input and output |
Analogue: | BNC connection |
Other | |
Dimensions: | 112mm x 100mm x 307mm (housing with sunshield) |
Weight: | 2.2kg |
Warranty: | 3 year manufacturer's warranty |
Mounting methods: | Wall-mountable |
Operating temperatures: | -35 to 50°C |
Power consumption: | 24V AC: 17W. High PoE: 20W |
Dynamic DNS: | Yes |
Protocols supported: | IP, TCP, UDP, HTTP, SMTP, NTP, DDNS, UPnP, FTP, ARP, DHCP, PPPoE, DNS, RTSP, RTCP, Telnet, ONVIF, ICMP and IGMP |
QoS: | No |
Security: | Multiple user access levels with password protection |
System integration: | LILIN HTTP API |
ONVIF compliant: | Yes |