Skip to main content

Unfortunately, Mac users get a raw deal when it comes to setting up IP cameras as the software supplied to perform the initial setup is always Windows-based only. This is true for every IP camera we've come across so far and is also true of any Axis camera.

This is not to say that Axis cameras are not compatible with Macs, quite the opposite. Macs are capable of displaying live images from all of the cameras in Axis's range. There may be some limitations and you might find that you cannot achieve the full functionality from the camera without using the ActiveX control but you can still use the majority of functions.

Without the initial setup tools, how can an Axis camera be configured to work with a Mac? Read on to find out how.

Set up without the CD

It's actually very easy to set up an Axis camera without using the setup tool on the CD, in fact, we rarely use these tools here in the office at all.

What you'll need is the following:

  • 1x Mac
  • 1x Axis IP Camera
  • 1x Ethernet "Crossover" cable

Step 1 - Connect the camera

Without the initial setup software, we cannot configure the camera when it is plugged into your router. We, therefore, need to connect the camera directly to a Mac.

For two devices to connect directly without going through a router you will need a special kind of Ethernet cable called a "Crossover" cable. This is essentially a standard Ethernet cable but wired differently so two devices can communicate directly. You should be able to pick one up from any computer store as they are fairly common.

Power on the camera and connect the crossover cable from the Ethernet port in the camera to the Ethernet port on your Mac.

Step 2 - Change the IP address of your Mac

Important: Before you change the IP address details of your Mac keep a note of the original settings so that once the camera has been setup you can easily change them back. To access your IP camera we must first make the IP address of your Mac compatible with the camera's default IP address of 192.168.0.90.

To do this first open your 'System Preferences' by selecting it from the doc at the bottom of the screen.

Select the 'Network' icon (highlighted) to edit your network settings.

This dialogue will show the available networks you can use from your Mac. With the Axis camera connected to the Ethernet port, we choose 'Built-in Ethernet' (we can also see there is a positive connection by the green light) and click the 'Configure' button.

We want to configure a static IPv4 address so select 'Manually' from the IPv4 drop-down box. This will allow the input of a fixed IP address into the Ethernet connection of the Mac.

To allow communication with the Axis camera we need to pick an address which is in the same subnet as the Axis camera's default IP address.

Use the following details and enter them in the corresponding boxes in the network dialog as shown above. These details will be compatible with the default IP address of the Axis camera:

  • IP Address: 192.168.0.10
  • Subnet Mask: 255.255.255.0
  • Router: 192.168.0.1
  • DNS Servers: Not important at this stage, used for Internet communication only
  • Search Domains: Optional entry, leave blank as this is not important

Click 'Apply Now' to save your changes and your Mac should now be set up and ready to configure the camera.

Step 3 - Connect to the Axis camera

The Axis camera should now be able to communicate with the Mac. Open an Internet browser and use the camera's default IP address to connect to the camera:

http://192.168.0.90

When accessing the camera for the first time it will ask you to set the administrator username and password. Once set you will be asked to confirm both the username and password before it displays a live image.

Step 4 - Configure your camera's IP address

On the live image page click the 'setup' link at the top right-hand side of the page. This will open the camera's setup pages.

Using the menu on the left-hand side of the page, click on the '3. TCP/IP' link under the 'Basic Configuration' heading to edit the camera's IP address.

Under the IPv4 header for the Ethernet connection, you can either set the camera to obtain the IP address automatically or set a manual, static address.

To have the camera obtain an IP address automatically, select the Obtain IP address via the DHCP option. Note that DHCP must be enabled in your router (this is usually on by default for most routers)

To set a static address for the camera select the "Use the following IP address:" option and then type in your chosen IP address, subnet mask and default router appropriate to your network.

Step 5 - Wireless Cameras

If you have a wireless camera such as a 207W, 207MW or 211W then you might want to consider setting the wireless component before unplugging the camera from your Mac. Help with setting up the wireless connection is covered in how to get your Axis camera to work on your wireless network.

Finish

The camera has now been set up. Unplug from your Mac and plug into your network. Remember to revert the settings in your Mac to what they were previously then you should be able to access your network and have access to your camera.

We're here to assist you
Speak to one of our experts, call us on 0151 633 2111