

Optimised for indoor areas subject to changing light conditions, the P3267-LV dome camera features 40m OptimisedIR, Lightfinder 2.0 and Forensic WDR, ensuring high definition video capture in dark or overexposed conditions.
Equipped with intelligent analytics and high-quality low-light performance, the P3267-LV indoor dome camera delivers 5MP resolution video at up to 30 frames per second (fps) - 24 hours a day. Featuring Axis’ innovative ARTPEC-8 chipset, this camera makes use of a deep learning processing unit (DLPU) to provide highly granular object analytics. Axis Object Analytics (AOA) is an advanced technology that enables the camera to detect moving objects and distinguish between humans and vehicles, as well as several vehicle classes, all on the edge. This technology comes at no extra cost and allows users to set event triggers or alarms based on specific object scenarios, enhancing scene awareness and reducing false alarms. Additional features include built-in cybersecurity, deep learning analytics and vandal-resistant casing.
Allowing flexibility in setting the required viewing angle during installation, the camera’s varifocal lens supports horizontal views between 40° and 104°. Designed to provide clear footage in all manner of light conditions, thanks to advanced imaging technologies such as Lightfinder 2.0 and OptimisedIR. Full-colour footage is captured in light levels as low as 0.13 lux when Lightfinder 2.0 is in use, ensuring important details are not missed and important objects are more likely to be detected. The unit also features up to 40m of OptimisedIR illumination that adjusts intelligently to reduce IR glare or reflections that may be generated if the camera is mounted on a corner or close to a wall. Users can rest assured that their video data is kept safe with built-in cybersecurity features to help prevent unauthorised access to the system. Furthermore, the unit is physically protected against tampering with IK10-rated vandal-resistant casing – suitable for installation in areas in which the camera is likely to be subject to deliberate damage.
As well as the intuitive low-light technology provided by Lightfinder 2.0, this unit also features a range of other advanced imaging technologies to ensure the best possible video quality in an assortment of conditions. Forensic WDR, optimised for high contrast areas, uses intelligent algorithms to lower noise levels and increase image signal, balancing light and shadows to ensure no detail is lost to extreme exposure. Moreover, Corridor Format is designed to enhance the recording of narrow scenes by rotating the video stream 90°, reducing the amount of redundant space in the field of view.
As the Axis P3267-LV is equipped with the state-of-the-art ARTPEC-8 chipset and a deep learning processing unit, it features a range of innovative analytics applications, with the ability to download additional applications via the Axis Camera Application Platform, according to user requirements. The camera’s most intuitive analytics application is Axis Object Analytics (AOA), providing highly nuanced object detection and classification with fewer false alarms. Thanks to its deep learning capabilities AOA is able to distinguish between humans, vehicles and types of vehicles and trigger alerts based on line crossing or identification of an object in the field of view.
Equipped with a built-in SD card slot (card not included), this unit is able to either work as a standalone system without the need for external storage or use edge storage to form a data backup in case of network failure. Users can manage their surveillance remotely via the free Axis Companion Application or, if more advanced management is required, software such as Axis Camera Station and Milestone XProtect is available.
Installation is simplified by a handful of features including single cable power and network support via Power-over-Ethernet (PoE) as well as remote zoom and focus which eliminate the need for hands-on fine-tuning. Furthermore, this camera is housed in IP52-rated casing – allowing it to be situated in areas prone to small water sprays or dust build-up.
Please note: this camera does not come with a power supply, please select from the accessories tab if required.
Designed to provide intelligent and secure 24-hour monitoring of indoor areas prone to tampering and challenging light conditions, the Axis P3267-LV is the ideal choice for warehouses, schools and banks.
Included:
Optional (select from accessories tab):
Camera |
|
Environment: | indoor |
Type: | fixed dome |
Sensor: | 1/2.7” progressive scan RGB CMOS |
Lens: | varifocal, 3–8 mm, F1.3 Horizontal field of view: 104°–40° vertical field of view: 74°–29° minimum focus distance: 1 m (3.28 ft) IR corrected, remote zoom and focus, P-Iris control |
PTZ: | digital PTZ only |
Audio: | Audio in, simplex, two-way audio via edge-to-edge technology |
Power: | Power over Ethernet (PoE) IEEE 802.3af/802.3at Type 1 Class 3 Typical 6.4 W, max 9.0 W |
Memory: | 2048MB RAM, 8192MB Flash |
Imaging |
|
Resolution: | 2592 x 1944 to 160 x 90 |
Compression: | H.264 (MPEG-4 Part 10/AVC), H.265 (MPEG-H Part 2/HEVC), Motion JPEG |
Frame rate: | 25/30 fps with power line frequency 50/60 Hz |
Video streaming: | multiple, individually configurable streams in H.264, H.265, and Motion JPEG Axis Zipstream technology in H.264 and H.265 controllable frame rate and bandwidth VBR/ABR/MBR H.264/H.265 video streaming indicator |
Day/night: | automatically removable infrared-cut filter |
Minimum illumination: | with Forensic WDR and Lightfinder 2.0: Colour: 0.13 lux at 50 IRE, F1.3 B/W: 0 lux at 50 IRE, F1.3 |
IR illumination: | OptimisedIR with power-efficient, long-life 850 nm IR LEDs Range of reach 40 m (130 ft) or more depending on the scene |
Video overlay: | text and image |
Image settings: | saturation, contrast, brightness, sharpness, Forensic WDR: up to 120 dB depending on scene, white balance, day/night threshold, local contrast, tone mapping, exposure mode, exposure zones, defogging, barrel distortion correction, compression, rotation: 0°, 90°, 180°, 270° including Corridor Format, mirroring, dynamic text and image overlay, privacy masks, polygon privacy mask |
Analytics |
|
Application Programming Interface: | open API for software integration, including VAPIX and AXIS Camera Application Platform; specifications at axis.com One-click cloud connection ONVIF Profile G, ONVIF Profile M, ONVIF Profile S, and ONVIF Profile T, Support for Session Initiation Protocol (SIP) for integration with Voice over IP (VoIP) systems, peer to peer or integrated with SIP/PBX. |
Event triggers: | AXIS Object Analytics AXIS Video Motion Detection, active tampering alarm, audio detection Support for AXIS Camera Application Platform enabling installation of third-party applications |
Event action: | Overlay text, external output activation, zoom preset, day/night mode, flash status LED, use lights, set defog mode, set WDR mode Calls: end SIP call, make SIP call, answer call I/O: toggle I/O once, toggle I/O while the rule is active MQTT: publish Notification: email, HTTP, HTTPS, TCP, and SNMP trap Pre- and post-alarm video or image buffering for recording or upload Record video: SD card and network share Upload of images or video clips: FTP, SFTP, HTTP, HTTPS, network share, and email |
Privacy masking: | yes |
Video Management |
|
On-camera recording: | support for microSD/microSDHC/microSDXC card, support for SD card encryption (AES-XTS-Plain64 256bit), recording to network-attached storage (NAS) |
Network video recorders: | Axis NVRs, Milestone Husky NVRs, ONVIF support for 3rd party NVRs |
Video Management Software: | Axis Companion, Axis Camera Station, Milestone XProtect |
Cloud: | Morphean Cloud CCTV, CamStreamer Cloud |
General |
|
Network connections: | RJ45 10BASE-T/100BASE-TX PoE |
Alarm I/O connections: | I/O: 4-pin 2.5 mm (0.098 in) terminal block for 1 supervised digital input and 1 digital output (12 V DC output, max. load 25 mA) Audio: 3.5 mm mic/line in |
Dimensions: | Ø149 mm x 107 mm |
Weight: | 0.80kg |
Casing: | IP52- and IK10-rated Polycarbonate hard-coated dome Polycarbonate casing colour: white NCS S 1002-B |
Operating temperatures: | 0°C to 50°C |
Mounting methods: | ceiling, wall |
Installation aids: | Remote zoom and focus, straighten image, pixel counter, level grid |
Warranty: | 5-year |
Power consumption: | max. 9.0W |
Protocols supported: | IPv4, IPv6 USGv6, ICMPv4/ICMPv6, HTTP, HTTPS, HTTP/2, TLS, QoS Layer 3 DiffServ, FTP, SFTP, CIFS/SMB, SMTP, mDNS (Bonjour), UPnP , SNMP v1/v2c/v3 (MIB-II), DNS/DNSv6, DDNS, NTP, RTSP, RTCP, RTP, SRTP, TCP, UDP, IGMPv1/v2/v3, DHCPv4/v6, ARP, SOCKS, SSH, SIP, LLDP, CDP, MQTT v3.1.1, Syslog, Link-Local address (ZeroConf) |
Security: | password protection, IP address filtering, HTTPS encryption, IEEE 802.1x (EAP-TLS) a network access control, digest authentication, user access log, centralized certificate management, brute force delay protection, signed firmware, secure boot Axis Edge Vault, Axis device ID, secure keystore (CC EAL4 certified) |
Approvals: | EMC EN 50121-4, EN 55032 Class A, EN 55035, EN 61000-3-2, EN 61000-3-3, EN 61000-6-1, EN 61000-6-2, FCC Part 15 Subpart B Class A, ICES-3(A)/NMB-3(A), IEC 62236-4, KC KN32 Class A, KC KN35, RCM AS/NZS CISPR 32 Class A, VCCI Class A Safety CAN/CSA C22.2 No. 62368-1, IEC/EN/UL 62368-1, IS 13252 Environment IEC 60068-2-1, IEC 60068-2-2, IEC 60068-2-6, IEC 60068-2-14, IEC 60068-2-27, IEC 60068-2-78 IEC/EN 60529 IP52, IEC/EN 62262 IK10 Network NIST SP500-267 |