Skip to main content
Zoom the image with the mouse

| XRN-420S

Hanwha Vision XRN-420S 4K network video recorder with 4 channels, HDMI/VGA dual output, PoE switch and up to 6TB storage

£399.60 inc VAT
Free delivery on mainland UK and most EU countries. Check delivery charges to where you are.

Ideal for small businesses, the Hanwha Vision XRN-420S offers a simple recording solution for up to 4 camera channels. It also features a PoE switch with 4 ports, allowing straightforward, self-contained networking and power supply.

  • 4 camera channels
  • Up to 6TB of storage
  • Integrated PoE switch: 50W budget
  • Wisenet Viewer software is free to download
  • Hanwha Vision 5-year warranty on recorder
Options available:
Hurry! Only left

Overview of the Hanwha Vision XRN-420S

  • Integrated PoE switch with a budget of 50W
  • Compatible with Wisenet Viewer and Wisenet WAVE
  • HDMI/VGA monitor output
  • Integrated video analytics
  • Hanwha Vision 5-year warranty (not including WD Purple hard drives)

This cost-effective NVR supports the recording of up to four Hanwha Vision or third-party (via ONVIF) IP cameras. Ideal for entry-level installations with a small number of cameras, this unit supports the free Wisenet Viewer application for remote viewing. Furthermore, the XRN-420S also offers a built-in PoE switch with a budget of 50W, HDMI/VGA outputs and support for two-way audio.


Supporting 4 camera channels at up to 8MP, this NVR features a straightforward user interface and a choice of either 4TB or 6TB of storage (selectable from the dropdown menu). In addition, it also offers dual outputs for HDMI and VGA local displays, providing a simple, PC-less solution.

Video Management

As well as supporting basic remote management through the Wisenet Viewer application, the XRN-420S is compatible with Wisenet WAVE video management software to create a tailored monitoring system for a range of different requirements, including a variety of search tools to retrieve important footage. Furthermore, footage can be exported via one of two USB ports for further investigation.

Video Analytics

Users can enhance scene awareness with built-in analytics capabilities including motion detection alarms that trigger alerts via email and recording (including pre/post-event recording) if movement is detected by any of the connected cameras. Moreover, support for audio-based detection is also included (with the connection of an audio-enabled camera) to respond to loud or suspicious sounds in the recording area.


Setup is straightforward when using the installation wizard and the unit can be easily located upon a desktop, reducing the need for mounting equipment when integrating the camera into an office setup. Compatible cameras are easily connected using a built-in 4-port PoE switch. Additionally, N+1 redundancy forms a backup to ensure that the system is still available in the event of component failure, retaining important data.

Please note: this Hanwha Vision NVR is provided with a choice of one 4TB or 6TB WD Purple hard drive (fitting required). These drives are specifically engineered for video surveillance applications. (Please select storage from the dropdown menu above).

Key features & benefits

  • Entry-level NVR with support for up to 4 cameras
  • A single SATA hard disk can be supplied (fitting required) to provide either 4TB or 6TB of storage (please select storage capacity from the dropdown menu)
  • Camera resolutions up to 8MP are supported
  • Built-in PoE switch with 4 ports simplifies camera connection
  • Remote viewing is possible via the free Wisenet Viewer application
  • Dual monitors can be connected through the integrated HDMI/VGA ports, providing a PC-less system
  • Footage can be exported for closer inspection using the 2 built-in USB ports
  • Video motion detection alarms can be configured to enhance scene awareness and notify users of activity via notifications such as email
  • N+1 failover system keeps a backup of important data in the event of a component failure

Typical applications

Featuring support for four camera channels up to 8MP and up to 6TB storage, this NVR is ideal for small-scale applications such as restaurants, independent retail stores and GP practices.



  • Quick installation guide
  • 1 x USB mouse
  • Power adapter
  • Power cord

Optional (please select from the dropdown menu):

  • Storage capacity
Back To Top

Key technical features for the Wisenet XRN-420S


Environment indoor
Supported devices: Wisenet IP cameras
Maximum no. of cameras: 4
HDD type: up to 6TB, 1 SATA interface for 1 HDD
Maximum throughput: 50Mbps recording, 32 Mbps playback (4ch simultaneously)
Audio: 4-ch output, two-way audio support (camera model dependent)
Power: 100 ~ 240 V AC ±10%


Resolution: up to 8 megapixel
Compression: H.265, H.264, MJPEG
Frame-rate: combined capability of up to 120 fps

Viewing, detection & recording

Camera control: PTZ control supported
Recording mode: normal, dual stream, schedule (continuous/event), event (pre/post), bookmark
Alarm detection: alarm input, video loss, camera event (sensor, MD, video analytics, defocus, audio), dynamic event
Alarm notifications: E-Mail, event push, PTZ preset, alarm out, buzzer, monitor out


Power: 100 ~ 240 V AC ±10%
Network: PoE RJ-45(LAN, 10/100) 4 ea ,RJ-45 1ea (WAN, 1Gbps)
Audio: out 1EA
Other: 4 x alarm input, 2 x alarm output, 1 x VGA, 1 x HDMI, 3 x USB


Dimensions: 300 x 47.1 x 208.4 mm
Weight: 1.06kg
LED indicator: power, record, network
Security: IP address filtering, User access Log, 802.1x, Encryption Device certificate(Hanwha Techwin Root CA), Signed firmware 
Operating temperatures: temperature: 0°C ~ 40°C
Power consumption: max. 67W
Protocols supported: IPv4, IPv6, TCP/IP, UDP/IP, RTP (UDP), RTP (TCP), RTSP, NTP, HTTP, DHCP (Server, Client), SMTP, ICMP, IGMP, ARP, DNS, DDNS, uPnP, HTTPS, SNMP, ONVIF (Profile-S), SUNAPI(Server, Client)

We're here to assist you
Speak to one of our experts, call us on 0151 633 2111