Skip to main content
Zoom the image with the mouse

| N-WV-SP508-1

Panasonic i-Pro WV-SP508 indoor IP security camera with HD 1080p, 3.1 megapixel sensor and face detection technology

Free delivery on mainland UK and most EU countries. Check delivery charges to where you are.
Hurry! Only left

This product is discontinued, an alternative model is the Axis P1377


Overview of Panasonic i-Pro WV-SP508

The Panasonic i-Pro WV-SP508 is an HD 1080p indoor IP camera that comes packed with features ideal for monitoring indoor locations, with a built-in Face Super Dynamic feature that helps to improve clarity on facial features, ideal for scenarios where recognition is required.

A number of technologies help the camera to record in challenging light conditions. Adaptive Black Stretch and Super Dynamic allow the camera to view light and dark areas at the same time, with a built-in day/night mode to help improve sensitivity in low-light. H.264 compression and VIQS image quality systems help to reduce the strain on network resources with minimal effect on image quality.

The WV-SP508 is Power over Ethernet compatible, allowing the camera to receive network connectivity and power using a single cable, helping to save on wiring costs, while the Auto Back Focus feature adjusts the focus of the camera to the best possible quality at the touch of a button, saving on installation.

Please note: This camera does not come with a power supply. Should you require a Power over Ethernet midspan, please select one from the options above.

Key features & benefits of Panasonic i-Pro WV-SP508

  • Full HD 1080p - Identify people easily, even from a distance
  • SuperDynamic and Adaptive Black Stretch - Capture detail in high-contrast lighting
  • Face SuperDynamic - Adjust image exposure automatically for optimum definition of facial features
  • Variable Image Quality on Specified areas (VIQS) - Minimise bandwidth by lowering video quality in non-essential areas
  • Electronic day/night switching - Produce monochrome video in low-light for brighter footage

Typical applications of Panasonic i-Pro WV-SP508

The camera is ideal for monitoring indoor locations which may be susceptible to challenging light conditions and where facial recognition could be a key factor, including department stores, business entrances, train stations, bus depots, airport terminals and government buildings.

Included accessories for Panasonic i-Pro WV-SP508

  • Panasonic WV-SP508 IP camera (WV-SP508)
  • Fujinon 2.8-12mm lens with 81-21° horizontal angle of view (YV4.3X2.8SA-SA2)
  • Wall/ceiling-mount camera stand (VB1B)
  • Installation Guide
  • CD-ROM
  • Code Label
  • Power Cable Plug
  • Safety Wire
  • Safety Wire Plate for ceiling
  • Safety Wire Lug for wall
  • Wire lug fixing screws (M2.5 x 8mm)
  • Washer
  • Spring Washer
Back To Top

Key technical features for the Panasonic i-Pro WV-SP508

Environment: Indoors
Type: Fixed box-type
Sensor: 1/3" MOS sensor
Lens: Fujinon 2.8-12mm auto-iris lens
Power: 12V DC or IEEE802.3af Power over Ethernet (supply not included)
Compatibility: Microsoft Internet Explorer only
Resolution: 1920x1080, 1280x960, 1280x720, 640x480, 640x360, 320x240 and 320x180
Compression: H.264 and MJPEG
Frame-rate: 15fps @ 2048x1536, 30fps below
Bandwidth control: H.264: Constant bitrate, framerate priority and best effort
Day/night: True day/night with switchable infrared-cut filter
Minimum illumination: Colour: 0.5lux. Monochrome: 0.06 lux (F1.4, Auto slow shutter:Off (1/30s), Gain:On(High))
Digital zoom/PTZ: 1x, 2x and 4x digital zoom controlled by browser
Video overlay: Timestamp
Analogue video out: Analogue video out for installation tools: 1Vp-p / 75 Ohm PAL composite
Viewing, detection & recording
Multi-camera viewing: No
Privacy masking: Yes
Simultaneous users: Up to 14
Alarm detection: External input, motion detection and Panasonic command alarm
External alarm inputs and outputs:1x input, 1x output
Alarm notifications: E-mail notification, indication on browser, FTP image transfer and Panasonic protocol output
Recording triggers: Manual, alarm and backup upon network failure
Compatible recording platforms (not included)
Software:Milestone XProtect, SecuritySpy (for Mac OSX)
Hardware:Panasonic network video recorders, QNAP network video recorders
Power: Terminal blocks for 12V DC
Network: 10/100Mbps RJ-45 Ethernet connection with PoE support
Alarm I/O: 1x trigger input and 1x relay output
Analogue: RCA port
Dimensions: 75mm x 65mm x 132.5mm (camera only)
Weight: 420g
Colour: Silver
Warranty: 3-Year manufacturer's warranty
Mounting methods: Wall or ceiling mountable using the included bracket
Operating temperatures:−10 to 50°C
Power consumption: 550mA (Class 2 PoE)
Dynamic DNS: Yes, using Panasonic's Viewnetcam service
QoS: No
Security: SSL encryption and multi-level password support
System integration: Panasonic CGI reference available
ONVIF compliant: Yes
We're here to assist you
Speak to one of our experts, call us on 0151 633 2111