Skip to main content
Zoom the image with the mouse

| IQA30NI-B5

IQeye Alliance-pro IQA30NI-B5 indoor dome IP camera with 2-way audio, day/night, PoE and vandal-resistant housing

Free delivery on mainland UK and most EU countries. Check delivery charges to where you are.
Hurry! Only left

This product is discontinued, for alterative models please see LILIN IP Cameras

Overview of IQeye Alliance-pro IQA30NI-B5

The IQeye Alliance-pro IQA30NI is a compact dome IP camera that can be used for both indoor and outdoor surveillance. With a wide range of features, such as IQinVision's Lightgrabber II feature to increase camera sensitivity in order to capture more light during difficult lighting conditions, the IQA30NI is ideal for continuous monitoring. A built-in infrared-cut filter switches from full colour to black and white video, which when used alongside infrared illumination (sold separately) allows the camera to record around-the-clock.

The camera also has a number of options to allow for localised recording, including an on-board MicroSD card slot and a Direct-to-Storage feature that records to a local network drive, helping to save on additional storage. The camera also has a built-in microphone and two-way audio capability allows for communication between remote locations and those in the camera's field of view, useful for when instructions or warnings need to be communicated.

The IQA30NI is a low-power unit that runs on less than 4W of power, providing an eco-friendly security solution, with Power over Ethernet compatibility to allow power and network connectivity to reach the camera, saving on wiring.

Please note: this camera does not come with a power supply. Please select if required.

Key features & benefits of IQeye IQA30NI-B5

  • Lightgrabber II feature adjusts the camera settings in response to low-light conditions to help capture the best possible image
  • Day/night mode using an infrared-cut filter to switch from full colour to black and white for round-the-clock monitoring (infrared illumination required)
  • Two-way audio allows communication between control rooms and the camera's field of view
  • Direct-to-Storage and MicroSD card slot provides a more localised recording solution, saving on recording devices (MicroSD card sold separately)
  • Power over Ethernet compatibility allows power and a network connection to reach the camera using a single cable
  • Vandal-resistant dome housing helps protect the camera against attempts to damage the mechanism

Typical applications of IQeye Alliance-pro IQA30NI-B5

The IQA30NI-B5 is suitable for surveillance of areas that may be prone to vandalism, both indoors and outdoors, including shopping centres, schools, loading bays, prisons and public parkways.

Accessories for IQeye IQA30NI-B5


  • IQeye Alliance-pro IQA30NI-B5 IP camera (IQA30NI-B5)
  • B5 Wide Angle Lens
  • Installation CD
Back To Top
Type:dome camera
Sensor:0.3 megapixel 1/3" CMOS sensor
Lens:B5 wide angle lens (3-13mm); 1/3" M14, F1.4; viewing angle: 27° - 89°
Audio:two-way audio using G.711 compression (PCM 8 kHz)
Power:Power over Ethernet (802.3af) Class 1; 24V AC; 12-24V DC
Resolution:720x480 (maximum)
Compression:H.264 and MJPEG
Frame-rate:up to 30 fps
Bandwidth control:simultaneous H.264 & MJPEG streaming
Day/night:yes (IR range: 800–940 nm)
Minimum illumination:colour: 0.1 lux; black and white: <0.05 lux
Imaging:shutter speed: 1/12000; saturation, contrast, brightness, sharpness, Lightgrabber II
Viewing, detection & recording
Simultaneous users:up to 8 local or remote users using IQaccess application
Alarm detection:motion detection (user configurable)
External alarm inputs and outputs:1 input, 1 output
Recording triggers:motion detection, external device
On-camera recording:Micro SD (Class 6+)
Recording software included:on-camera IQaccess application
Compatible recording platforms (not included)
Software:Milestone XProtect, IQeye IQrecorder
Power:Power over Ethernet (802.3af) Class 1; 24V AC, 12-24V DC
Network:RJ45 10Base-T/100Base-TX Ethernet with PoE support
Physical I/O:4-pin push-in terminal block for 1 input, 1 output
Audio:terminal block for Mic/Line in, Line out; terminal block for speaker output
Dimensions:146.2mm(W) x 98.6mm(H) – 137.6mm (w/backbox)
Colour:white with black dome
Warranty:5 year manufacturer warranty
Mounting methods:ceiling mount
Operating temperatures:-20 – 50°C
Power consumption: <3.4W (typical)
Protocols supported:TCP/IP, HTTP, HTTPS, DHCP, UDP, RTP, RTSP, DNS, ARP, ICMP, NTP, UPnP, ZeroConf, APIPA, UDP multicast, SNMP, FTP, SMTP, Telnet, CIFS
Security:secure multi-level password protection
System integration:ONVIF, PSIA, IQfinder, IQmanager, IQsentry, IQevent, Direct-to-Storage
ONVIF compliant:yes
We're here to assist you
Find out how we can help, call us on 0151 633 2111