IP66-rated for all-weather operation, this versatile horn speaker is ideal for projecting audio over long distances both indoors and outdoors. Installation is simple and cost-effective thanks to PoE support and the included mounting bracket.
Capable of delivering loud and clear audio over long distances, the SPA-H100 is an effective all-in-one horn speaker suitable for a large variety of operations. Thanks to its IP66-rated casing, it can be installed in outdoor environments exposed to wet weather conditions such as building yards and ports where delivering safety instructions and commands can prove crucial. Support for PoE/PoE+ enables cost-effective network connection with reduced cables, allowing effective transmission of announcements and audible alerts. The included Wisenet Audio Management System allows you to configure, play and schedule a range of audio messages to enhance surveillance within your installation. Integrate with your organisation's Video Management Software (VMS) to help operators proactively deal with events detected by cameras, enabling automated audible alerts or talkback to tackle unwanted and concerning behaviour.
The dome-type speaker driver combined with a built-in 10w Class D amplifier delivers an impressive sound pressure level of 124dB, perfectly suited for projecting high-quality audio over long distances like train stations or stadiums. Low end sounds are limited to the frequency range of 650Hz - 5.3kHz, improving audio clarity to ensure announcements are heard and understood. The built-in embedded microphone means users can perform sound status health checks to maintain the working status of their system.
Available recording and audio management options for this speaker:
Speaker |
|
| Environment: | indoor/outdoor use |
| Type: | horn speaker |
| Power: | PoE (IEEE 802.3 af type 1 Class 3)
PoE+(IEEE 802.3 at type 2 Class 4) |
Audio Hardware |
|
| Speaker component: | 1" HF Driver. Dome type |
| Max sound pressure level: | 124 dB |
| Frequency range: | 650 Hz - 5.3 kHz |
| Built-in microphone: | Embedded microphone for sound testing |
| Amplifier description: | Built-in 10 W Class D amplifier |
| Speaker coverage: | (HxV) : 130° X 160°(1kHz) / 30° X 50°(4kHz) |
Audio Software |
|
| Supported audio format: | WAV, MP3 in mono/stereo from 64 kbps to 320 kbps.
Sampling rate from 16 kHz up to 48 kHz. |
General |
|
| Dimensions: | 241(W) x 155(H) x 307(D)mm |
| Weight: | 3.7Kg |
| Casing: | Colours: white, black
IP66-rated |
| On-board storage: | 1GBytes internal storage MicroSD card up to 32GB (not included) |
| Operating temperatures: | -40℃ ~ +55℃ (-40°F ~ +131°F) (Cold start : -35℃/ -31°F) |
| Warranty: | 5-year |
| VoIP: | Tested with SIP clients such as Grandstream, Yealink, Cisco, MicroSIP softphone and PBX suppliers such as Grandstream
Supported SIP features: DTMF (RFC2833) Supported codecs: PCMU, PCMA, speex/8000, speex/16000 |
| Health monitoring: | Sound level meter (via embedded microphone) |
| Protocols supported: | IPv4, HTTP, SIP, mDNS, DNS, NTP, TCP, UDP, DHCP, ARP, ICMP |
| Security: | Password protection : admin,setup,user,guest (sha-2, Digest authentication, User access log) Digest authentication, User access log |
Hanwha Vision (Wisenet) | SPA-C100
Hanwha Vision (Wisenet) | SPA-P100
Hanwha Vision (Wisenet) | SPA-W100W
