Hanwha Vision (Wisenet) | SPA-D1000
Hanwha Vision SPA-D1000 IP audio module with built-in amplifier, edge storage PoE/PoE+ and VoIP support
Transmit IP audio across a network through passive and analogue speakers with this audio module featuring a built-in amplifier, PoE+ support and alarm outputs. Configure, play and schedule audio files via the included Wisenet Audio Management System.
- Enables passive and analogue speakers to be used on an IP network
- PoE/PoE+ support simplifies installation
- Built-in 10w Class D amplifier
- Connect analogue amplifiers for even greater volume
- MicroSD card support allows upload of audio files
- Hanwha Vision 5-year warranty
Overview of Hanwha Vision SPA-D1000 IP audio module
- Allows passive and analogue speakers to be used as part of an IP-based audio network
- Upgrade existing speaker systems through seamless integration
- Simple and cost-effective installation with PoE/PoE+ support
- Wisenet Audio Management System included, fully integrated with Wisenet VMS
- Hanwha Vision 5-year warranty
Installations which can benefit from the additional capabilities of IP audio added to their existing speaker systems can take advantage of this cost-effective audio module from Hanwha Vision. Equipped with a built-in amplifier, the module can power passive and analogue speakers whilst facilitating network connection via PoE/PoE+. The included Wisenet Audio Management System provides a user-friendly interface for configuration and scheduling of audio announcements and background music. Integration with Wisenet VMS helps operators respond faster to events detected by network cameras, allowing them to audibly address concerns such as unwanted behaviour and intruders. Additionally, on-board storage is supported with a microSD card (not included) where audio files can be uploaded to the software to create a personalised IP audio library.
Audio Capabilities
Equipped with a built-in 10w Class D amplifier, the module is capable of adequately powering passive speakers, however an additional analog amplifier can also be connected to facilitate greater volume levels. The built-in embedded microphone allows users to perform sound status health checks to maintain the effectiveness of their system.
Recording and Audio Management
On-board microSD card support allows users to upload audio files to develop a personalised library tailored specifically to their application for clip playback or audio soundscape. Seamless integration of the included Wisenet Audio Management System with Wisenet VMS enables audible alert messages to be played upon detection of events by cameras within the network.
Further recording and audio management options for this module:
- microSD card (not included)
- Wisenet Viewer application
- Wisenet WAVE
- Milestone XProtect video management software
Installation and mounting options
Measuring just 123 x 80 x 30mm, this compact device can be mounted in a variety of locations, including on the side of an existing speaker for unobtrusive installation.
Accessories included
- Audio module
- Installation guide
- Terminal connectors
Key technical features of the Hanwha Vision SPA-D1000 IP audio module
Audio Module |
|
Environment: | indoor/outdoor use |
Type: | audio module |
Power: | PoE (IEEE 802.3 af type 1 Class 3)
PoE+(IEEE 802.3 at type 2 Class 4) |
Audio Hardware |
|
Frequency range: | 20 Hz - 20 kHz |
Built-in microphone: | Embedded microphone for sound testing |
Amplifier description: | Built-in 10 W Class D amplifier |
Audio Software |
|
Supported audio format: | WAV, MP3 in mono/stereo from 64 kbps to 320 kbps.
Sampling rate from 16 kHz up to 48 kHz. |
General |
|
Dimensions: | 123(W)*80(H)*30.6(D)mm |
Weight: | 0.24Kg |
On-board storage: | Internal memory: 1GBytes MicroSD card up to 32GB (not included) |
Operating temperatures: | --20 ~ +50℃ (-4°F ~ +122°F) |
Warranty: | 5-year |
VoIP: | Tested with SIP clients such as Grandstream, Yealink, Cisco, MicroSIP softphone and PBX supplier
such as Asterisk
Tested with SIP client such as Grandstream and PBX supplier such as Grandstream Supported SIP features: DTMF (RFC2833) Supported codecs: PCMU, PCMA, speex/8000, speex/16000 |
Health monitoring: | Sound level meter (via embedded microphone) |
Protocols supported: | IPv4, HTTP, SIP, mDNS, DNS, NTP, TCP, UDP, DHCP, ARP, ICMP |
Security: | Password protection : admin, setup, user, guest (sha-2, Digest authentication, User access log) Digest authentication, User access log |