Bosch Security | VJM-4016
Bosch Videojet multi 4000 16-channel network video encoder, H.264 support, dual streaming and built-in Motion+ detection
Suitable for security installations with existing legacy devices, looking to convert analogue video to IP, this encoder supports Motion+ video motion detection.
- Motion+ video motion detection
- Dual streaming
- Supports up to 30fps
- Encodes video from analogue cameras to IP
- 16-channel support
This product has been discontinued, for an alternative please see Network video encoders & decoders
Overview of the Bosch Videojet multi 4000 encoder
- Converts analogue video signals to IP video
- All communication channels are AES encrypted
- Motion+ video motion detection
- Bosch 3-year warranty
- Dimensions: 44 x 483 x 157 mm
Designed to enable businesses with existing analogue security installations to take advantage of an IP-based system, the Bosch Videojet Multi 4000 encoder converts up to 16 camera channels. With deinterlacing at video input and support for H.264 compression format, this reliable encoder supports framerates up to 30fps. This encoder also features Motion+ video motion detection using an algorithm based on pixel change to identify activity in the camera streams and notify users via email.
Featuring a built-in HDMI output, this encoder can stream video to a local display, ideal for public viewing in retail applications or monitoring in control rooms. Dual-streaming capabilities allow two video streams to be recorded simultaneously and the unit’s built-in I/O ports allow the connection of microphones and speakers to enable two-way audio. Additionally, all audio and video channels are AES encrypted for optimal security.
Key features & benefits
- Enables the conversion of up to 16 cameras from analogue to IP
- Deinterlacing prevents ‘combing’ and ensures the video is clear when converted
- H.264 compression format is supported
- Compatible with framerates up to 30fps
- Motion+ technology offers intelligent video motion detection to improve scene awareness
- HDMI output allows an external display to be connected
- Two simultaneous streams are available with dual-streaming
- I/O ports enable two-way audio with the connection of a microphone and speaker
- Data is protected as all channels are AES encrypted
Typical applications
Ideal for small to mid-sized applications with up to 16 camera channels, this encoder allows analogue installations to easily utilise the benefits of an IP-based system without needing to buy new cameras or expensive equipment.
Back To TopKey technical features for Bosch Videojet multi 4000 encoder
Encoder |
|
Environment | indoor |
Power: | max 23W |
Memory: | no info given |
Video |
|
Resolution: | Horizontal x vertical PAL/NTSC: 4CIF/D1: 704 x 576/480 (25/30 ips), 2CIF: 704 x 288/240 (25/30 ips), CIF: 352 x 288/240 (25/30 ips) |
PTZ: | not given |
Compression: | H.264 |
Image settings: | privacy masking, de-interlacing |
Framerate: | 1 to 25/30 fps |
Viewing, detection & recording |
|
Video streaming: | dual streaming in H.264, full performance and full frame rate on both streams for every video input channel |
Simultaneous users: | not given |
Alarm trigger: | motion detection, alarm input |
Alarm actions: | no info given |
Card recording: | no info given |
Bandwidth control: | no info given |
Connections |
|
Power: | max 23 W |
Network: | 10/100/1000 Base‑T, auto sensing, half/full duplex, RJ45 |
Video: | 16 x input, connector BNC, impedance 75 ohm, terminated, signal analogue composite, 0.7 to 1.2 Vpp, NTSC or PAL |
Other: | Audio 2 x mono in, microphone/line 1 x mono line out, connector 2 x 3.5 mm (1/8 in) stereo jack, signal line in 9 kohm typical, 5.5 Vpp max, microphone amplifier 60 dB max, signal line out 3.0 Vpp at 10 kohm Alarm 4 x input, connector Clamp (non-isolated closing contact), activation resistance 10 ohm max Relay 1 x output, connector Clamp, signal 30 Vpp (SELV), 0.2 A COM port Clamp, RS‑232/422/485 |
Other |
|
Dimensions: | 44 x 483 x 157 mm |
Weight: | 1.7kg |
Casing: | black metal casing |
Warranty: | 3 years |
Operating temperatures: | 0 °C to +50 °C |
Power consumption: | max: 23 W |
Protocols supported: | IPv4, IPv6, UDP, TCP, HTTP, HTTPS, RTP/RTCP, IGMP V2/V3, ICMP, ICMPv6, RTSP, FTP, Telnet, ARP, DHCP, APIPA (Auto-IP, link local address), NTP (SNTP), SNMP (V1, MIB-II), 802.1x, DNS, DNSv6, DDNS (DynDNS.org, selfHOST.de, noip.com), SMTP, iSCSI, UPnP (SSDP), DiffServ (QoS), LLDP, SOAP, Dropbox, CHAP, digest authentication |
Security: | no info given |
Software: | no info given |
ONVIF compliant: | yes |
Mounting: | standalone, rackmount or wall mount |