Vivotek FD7131 fixed dome IP camera with white LEDs for day and night, two-way audio, PoE and heat detection

This product is discontinued, for alternatives please see Indoor IP Cameras

The Vivotek FD7131 is a fixed dome, indoor IP camera which comes with a 1/4 inch progressive scan CMOS sensor providing resolutions up to 640x480 at 30 images per second. Coming equipped with a 2-4mm varifocal lens offering a viewing angle from 53-105°, the camera also offers dual streaming so that both MJPEG and MPEG-4 streams can be pulled from the camera simultaneously.

The FD7131 can produce useable images in light levels as low as 1.5 lux and offers twelve ultra-bright white LEDs, which can be controlled by an on-board light sensor, providing illumination in areas with no other external light sources. To assist with intruder detection, the FD7131 is also fitted with a passive infrared (PIR) sensor which will detect changes in heat. This can be used in conjunction with on-board features such as motion detection to reduce the amount of events registered in error. Also, for when away from a computer, the camera offers browser support for 3GPP compatible mobile phones.

A three-axis mechanical bracket is used for positioning of the lens, allowing the FD7131 to be wall or ceiling mounted dependant on requirements. Since the camera supports 802.3af Power over Ethernet (PoE), the camera can be installed quickly and easily as only a single cable needs to be extended from your existing network. Alternatively, the camera can be powered from the 12VDC power adaptor. The FD7131 also supports two-way audio which makes use of a built in microphone but also has input and output ports for additional audio equipment (not supplied).

Vivotek FD7131 - Key Benefits:

• Built-in ultra-bright white LEDs provide illumination in low light conditions
• Light sensor automates on-board LEDs
• On-board Passive Infrared (PIR) sensor helps to reduce false alarms
• Power over Ethernet support means that the camera can be installed into an existing PoE network, or can be powered with a PoE midspan (not included)
• 3GPP mobile phone browser allows you to monitor your camera when away from your computer

Vivotek FD7131 - Key Features:

• ¼” Progressive scan CMOS sensor
• Three axis sensor positioning mechanism
• Viewing angle of 53-105°
• 12 built-in ultra bright LEDs with light sensor
• Passive Infrared (PIR) sensor
• 802.3af Power over Ethernet connectivity
• Two-way audio
• Built in Microphone with external audio-in port
• 3GPP Mobile Phone Browser
• Combine multiple triggers such as motion detection and PIR sensor to reduce false alarms

Vivotek FD7131 - Typical Applications:

The Vivotek FD7131, with on-board LED illumination, infrared sensor and Power over Ethernet, would be best suited for night time security applications, where using multiple triggers to record images can help to reduce false alarms and optimise your recording.

Vivotek FD7131 - Key Technical Indicators:

• Sensor: ¼” progressive Scan CMOS sensor
• Lens: Varifocal board lens, f=2-4 mm, F1.4-1.8, focus range: 50 cm to infinity
• Available frame rates: 30 Frames per second for both JPEG and MPEG-4 simultaneously
• Available Resolutions: 640x480, 320x240, 176x144
• Compression format: Simultaneous JPEG and MPEG-4 streams
• Minimum light level required: 1.5Lux (0Lux when on-board LEDs are enabled)
• Number of simultaneous users: 10

Vivotek FD7131 - Connections:

• Female RJ-45 Ethernet Port
• AC power socket
• General I/O Terminal Block
• Audio out jack port
• Microphone in jack port

Vivotek FD7131 - Accessories Included:

• FD7131 IP camera
• AC power adaptor
• Software CD
• Alignment sticker
• Warranty card
• Quick Installation Guide
• Screwdriver
• Screws, fittings and IO Connector

Vivotek FD7131 - Datasheet: