Skip to main content
Zoom the image with the mouse


Veracity Highwire Quad VHW-HWQ Ethernet over co-axial video with 4-port switch with PoE output

Free delivery on mainland UK and most EU countries. Check delivery charges to where you are.
Hurry! Only left

This product is discontinued, an alternative is the Veracity VHW-HWPS-C4

The Veracity Highwire Quad VHW-HWQ is a 4-port switch with Power over Ethernet (PoE) output for powering up to 4 PoE class-2 (6.5W) network cameras from standard CAT5 Ethernet cables.

The Highwire Quad has an analogue video BNC connection at one end to receive data across existing legacy analogue cabling using a single Highwire unit at the opposite end (not supplied). Data can be transmitted at speeds of up to 200Mbps across co-axial cable suitable for megapixel and multiple camera installations.

Easy to install, the Highwire Quad requires no network configuration. Simply supply power to the unit and plug in a co-ax cable and network devices to use. Compact, robust and wall mountable it represents an affordable solution for multi-camera PoE installations.

Note: This device does not include a power supply. Please select one if required from the options above.

Veracity Highwire VHW-HWQ - Key benefits:

  • Legacy co-axial video cabling can be re-used for new generation digital IP CCTV surveillance providing significant cost savings
  • Power over Ethernet output provides data and power connections in up to 4 PoE Class 2 (6.5W) IP cameras allowing for a much simpler and cost-effective installation
  • High transfer rate of 200Mbps (max.) allows the use of megapixel or multiple IP cameras to run from a single co-axial cable

Veracity Highwire VHW-HWQ - Key features:

  • Existing analogue video cabling can be retained making significant cost savings when migrating to a digital IP CCTV solution
  • High transfer speed over co-ax of up to 200Mbps supports megapixel and multi-camera installations. Note that speeds will reduce if cable is over 200m length or damaged
  • Allows operation over analogue co-ax cable lengths of up to 300m. Full speed is achieved at lengths 200m or below
  • Will work with any network device. Highwire quad is not detectable on the network by any other networking device
  • Easy to install, the Highwire Quad requires no network configuration

Veracity Highwire VHW-HWQ - Typical applications:

  • Ideal for migrating from analogue CCTV to digital IP CCTV systems. Make significant cost savings using legacy co-axial video cable and Power over Ethernet output

Veracity Highwire VHW-HWQ - Key technical indicators:

  • Analogue interface: BNC connector 75ohm, up to 300m (200m for full data rate)
  • Data throughput max.: 200Mbps (total up + down). Auto-adaptation to cable conditions
  • Ethernet interface: 4x RJ-45, straight-through or cross-over (auto detected), 100BaseT/10BaseT, full/half duplex with auto negotiation
  • Power over Ethernet: IEEE 802.3af on 4 ports, suitable for powering up to 4 PoE class 2 (6.5W) cameras
  • Power input: 24V AC, use PSU VQ-24V-UK (not supplied)
  • Operating temperature: -10°C to 50°C
  • Dimensions: (HxWxD) 32 x 110 x 91mm
  • Weight: 250g (9oz.)

Veracity Highwire VHW-HWQ - Connections:

  • Analogue connector: BNC 75ohm
  • Ethernet connector: RJ-45 x4 with IEEE802.3af PoE output
  • Power input 24V AC terminal block connector
Back To Top
We're here to assist you
Speak to one of our experts, call us on 0151 633 2111