Veracity | VHW-HWPS-ERK4-UK
Veracity Highwire VHW-HWPS-ERK4-UK four channel video encoder replacement kit
Free delivery on mainland UK and most EU countries. Check delivery charges to where you are.
- Combines 4-ch base unit & 4 client units
- Provides up to 500m of network connection
- Status LEDs for quick network diagnosis
Overview of the Veracity VHW-HWPS-ERK4-UK
This Veracity VHW-HWPS-ERK4-UK kit consists of the Veracity VHW-HWPS-B4 four-channel base unit, four separate Veracity VHW-HWPS-C client units and the VPSU-57V-1500 power supply. Designed as a direct replacement for legacy analogue video encoders, this handy kit allows users to keep existing coax cabling during the process of converting analogue systems into digital IP systems.
The all-in-one kit provides a cost-effective solution for delivering Power-over-Ethernet (PoE) – without the need for new cabling. It's straightforward to install with no hardware configuration required and delivers up to 200Mbit/s of bandwidth and power-over-coax at up to 300m (RG-59) or 500m (RG-11). Both base and client units also feature a helpful LED display, which confirms network and power status via the cable - with no need to access remote equipment to check connections.
Key features & benefits
- Handy kit includes a 4-ch base unit, 4 individual client units and an 80W power supply
- Allows analogue camera systems to be upgraded to digital systems without having to replace cabling
- Provides network connection up to a distance of 500m
- Both Power-over-Ethernet and PoE+ are supported
- Straightforward installation with no hardware configuration required
Typical applications
The Veracity VHW-HWPS-ERK4-UK kit can be used to replace legacy video encoders in medium to large CCTV systems that require the upgrade of analogue cameras to IP cameras - whilst allowing existing coax cabling to be kept.
Back To Top
Key technical features for the Veracity VHW-HWPS-ERK4-UK
|
Details
|
|
| Ethernet connector type: | RJ-45 Ethernet connection |
| Highwire connector type: | base unit: 4 x BNC 75 Ohm, client unit: 1 x BNC 75 Ohm |
| Power input: | 57V DC, up to 6A via a 2-pin detachable screw terminal (supplied) or a 2 pin Micro-Fit power connector |
| Power output: | base unit: IEEE 802.3af (PoE) or IEEE 802.3at (PoE Plus) up to 25W per channel, client unit: IEEE 802.3af (PoE) or IEEE 802.3at (PoE Plus) |
| Range: | up to 300m 1000ft on RG59 or 500 metres 1640 feet on RG11 at full rate |
| Bandwidth: | 200 Mbps (total up + down) x 4 |
| Power consumption: | base unit: 4.5W, client unit: 1.5W |
| Dimensions: | base unit: 173 (L) mm x 110 (W) mm x 22 (H) mm, client unit: 104 (L) mm x 54 (W) mm x 24 (H) mm |
| Weight: | base unit: 356g, client unit: 140g |
| Warranty: | 5 years |
| Operating temperatures: | 0°C to 40°C |
| LEDs: | HIGHWIRE coax link, Ethernet link/activity, PoE-over-coax |