Skip to main content
Zoom the image with the mouse


Veracity Camswitch Mobile 4 Plus VCS-4P1-MOB 5-port Ethernet switch with PoE support IEEE802.3af / IEEE802.3at

£313.20 inc VAT
Free delivery on mainland UK and most EU countries. Check delivery charges to where you are.
  • 5-port unmanaged Fast Ethernet switch
  • Converts battery power into PoE supply
  • Compliant with IEEE802.3af/at standards
Hurry! Only left

Overview of the Veracity VCS-4P1-MOB Camswitch Mobile 4 Plus

The Veracity Camswitch Mobile 4 Plus is a fast Ethernet switch with 5 network ports. 4 ports are capable of Power-over-Ethernet (PoE 802.3af / 802.3at) whilst 1 non-PoE port provides an additional network connection. The Camswitch Mobile 4 Plus integrates a 5 port Ethernet switch with capability to convert an 8 to 40-volt DC supply into an 80-watt IEEE 802.3af/at compliant power source, ideal for converting 12 and 24-volt bus, train and car power supplies to PoE power (battery circuit fuse is required).

Compact and rugged, the VCS-4P1-MOB also comes with adjustable wall mount clips for easy, neat installation and auto-configuration for speed (10BASE-T or 100BASE-T) and duplex.

Total power budget

24V input: 80 watts
12V input: 80 watts (reduce to 65 watts for max 30°C temperature rise above ambient)
Less than 12V input: 60 watts (reduce to 50 watts if voltage can drop below 10V)

POE power conversion produces heat; the above limits are for horizontal mounting with ventilation. Installation in enclosed spaces will cause additional heating and power limiting.

8 port version: Veracity VCS-8P2-MOB Camswitch Mobile 8 Plus.

Key features & benefits

  • 5-port unmanaged fast Ethernet switch (10BASE-T / 100BASE-T) with 4 PoE ports (802.3af / 802.3af)
  • Auto-configuration of speed and duplex
  • Rugged and compact unit ideal for installation in transport applications
  • Converts battery power into PoE supply, ideal for temporary and mobile applications such as transport and solar-powered systems

Typical applications

The Veracity VCS-4P1-MOB Camswitch Mobile 4 Plus switch is ideal for the installation of IP video cameras in battery or solar powered, temporary and other low voltage applications such as transport, including buses, coaches, trains and trams.

Back To Top

Key technical features of the Veracity VCS-4P1-MOB Camswitch Mobile 4 Plus

Power input
Connector:detachable screw terminal
Voltage:8.5 - 40V (minimum startup voltage is 10.5V, supports engine cranking and reduce overdischarge) DC only (contact us for 24V AC applications)
Fusing:the use of an external fuse is recommended. Rating: 5 amps for 24V DC or 10 amps for 12V DC supply, slow blow type
PoE outputs
PoE standard:IEEE / IEEE 802.3at compatible, not isolated from DC input; for use in closed system transport applications; connected devices must be IEEE compliant, Veracity enhanced POE supports maximum efficiency and range
Ethernet interface
Connector:RJ45, 5-port unmanaged 10/100 switch
Rates:10BASE-T or 100BASE-T and duplex, auto-configuring for speed
Cable:straight through or crossover Cat 5, Cat 5e or Cat 6 patch
LED indicators
Green - POE ports:constant: POE enabled, off: no POE requested
Green - non POE ports:constant power: ok, off: no power
Yellow:constant: Ethernet ok, blink: network activity
Dimensions:L 110mm/131mm with side clips, W 100mm including connectors, H 40mm
Warranty:5 years
Mounting:5mm mounting holes on 122mm centres
Operating temperatures:-10°C to + 50°C
Compliance:CE, FCC, RoHS
We're here to assist you
Speak to one of our experts, call us on 0151 633 2111