Pelco ID10DN8-1 Indoor 1.3 megapixel fixed dome IP camera with H.264, day/night switching, on-camera recording and PoE

This product is discontinued, an alternative model is the Axis P3265-LV

The Pelco Sarix ID10DN8-1 is a fixed dome indoor IP camera with 1.3 megapixel resolution image sensor. With a resolution of up to 4x that of standard definition VGA IP cameras, the Pelco Sarix ID10DN8-1 can capture detailed images up to an image size of 1280x720 at full frame rate so that no detail is missed.

With its auto focus button the camera can be focused easily at the point of installation ensuring that all images delivered are sharp and of the highest quality. There is also an analogue video output which allows installers to easily view the camera's position at point of installation. The Pelco Sarix ID10DN8-1 comes with surface or recessed mounting options and Power over Ethernet connectivity.

A microSD card slot allows for on-camera recording or using Pelco's included DS4U 4-channel recording software you can store images to a PC or Mac.

Pelco Sarix ID10DN8-1 - Key benefits:

• Capture detailed and smooth footage at 1.3 megapixel resolution at up to 30fps
• 24-hr surveillance with true day/night for viewing in all lighting conditions (IR lighting required)
• On-camera recording options with microSD card slot which removes the need for additional recording equipment
• Complete surveillance solution with free 4-channel recording software for Windows and Mac

Pelco Sarix ID10DN8-1 - Key features:

• 1.3 megapixel sensor for detailed surveillance (1280x1024)
• Up to 30fps at 1280x720 resolution provides near TV-like motion
• Auto Back Focus (ABF) can accurately focus the camera with the touch of a button
• Power over Ethernet can simplify installation with only one cable required for both power and data
• Day/night switching enables the camera to capture images in complete darkness with additional infrared lighting (not included). The camera will automatically switch between day and night vision modes depending on surrounding light levels
• Sensitivity down to 0.03 lux for low-light viewing without any dedicated light source
• Analogue video output aids in installation and position of camera (additional cable required)
• Video Motion Detection (VMD) can detect movement and trigger alarms
• Optional two-way audio with additional expansion module (not included)
• microSD card slot for on-camera recording without the need for a PC recording station
• Two simultaneous streams allow for independent configuration for monitoring and archiving purposes
• H.264 compression offers bandwidth-efficient streaming while MJPEG provides ongoing compatibility
• Up to 16 Pelco IP cameras can be viewed from the same web interface
• Window blanking (privacy masking) obscures areas of the camera's view from monitoring and recording
• Surface mount and recessed ceiling mounting options included
• DS4U 4-channel recording software included for Windows and Mac

Typical applications for the Pelco Sarix ID10DN8-1:

• The ID10-DN8-1 is suitable for indoor surveillance in areas which require detailed and high frame rate footage such as stores, schools, bus stations, offices, reception areas, and medical facilities etc.

Pelco Sarix ID10DN8-1 - Key technical indicators:

• Video Compression: H.264 base profile and MJPEG
• Sensor: 1/3-inch CMOS, progressive scan
• Lens: 2.8-8mm varifocal, megapixel lens, f/1.2 – 1.9, horizontal field of view 89° - 32°
• Supported resolutions: 1280x1024, 1280x960, 1280x720, 800x600, 640x512, 640x480, 640x352, 480x272, 480x272, 320x256, 320x240, 320x176
• Frame rate: 20fps (MJPEG 1280x1024), 30fps (MJPEG 1280x720)
• Video streams: Up to 2 simultaneous streams
• Users: Up to 20 simultaneous users depending on resolution settings (2 guaranteed)
• Minimum illumination: Colour 0.5 lux (1x/33 ms); Mono 0.25 lux (1x/33 ms)
• Supported protocols: TCP/IP, UDP/IP (Unicast, Multicast IGMP), UPnP, DNS, DHCP, RTP, RTSP, NTP, IPv4, SNMP, QoS, HTTP, HTTPS, LDAP (client), SSH, SSL, SMTP, FTP, and mDNS (Bonjour), and 802.1x (EAP)
• Power: 24v AC / Power over Ethernet (IEEE 802.2af)
• Power consumption: less than 6W
• Operating temperatures: 0 – 50 °C
• Weight: 0.9kg
• Dimensions(Ø x H): 20.19 x 16.05cm (surface mount)
• Mounting: Surface mount or recessed ceiling mount

Pelco Sarix ID10DN8-1 - Connections:

• RJ-45 Network port, PoE (IEEE 802.3af)
• 24V AC Power connection
• Relay and alarm connections (1x input, 1x output)
• Accessory port (for use with compatible Pelco accessories)
• Micro SD card slot
• Analogue video output
• Auto iris lens connector

Pelco Sarix ID10DN8-1 - Accessories included:

• Back box with camera module
• Surface mount
• Lower dome (includes trim ring and bubble)
• Dome liner
• 4-pin alarm connector
• 2-pin power connector
• Quick start guide
• Resource disc

Pelco Sarix ID10DN8-1 - Additional items you may want to order with this camera:

• External audio adapter which adds audio playback and recording (IA-A)
• Pendant mount adapter
• Pelco analogue output cable