IQinVision | IQA35NE-B5
IQeye Alliance-pro IQA35NE-B6 outdoor IP camera with day/night, low-power PoE, Lightgrabber
Free delivery on mainland UK and most EU countries. Check delivery charges to where you are.
This product is discontinued, for alterative models please see LILIN IP Cameras
Overview of IQeye Alliance-pro IQA35NE-B6
With a robust vandal-resistant housing to protect against harsh weather and vandalism attempts, the IQeye Alliance-pro IQA35NE-B6 is an IP CCTV camera that is ideally suited to monitoring outdoor locations. Able to record highly-detailed IP video with its 5 megapixel sensor, as well as operate using less than 4W of power (delivered by PoE), the IQA35NE-B6 is an economical security solution that can be used in a wide variety of outdoor locations.
A number of built-in features help the camera to monitor continuously, including IQinVisions' Lightgrabber, which increases camera sensitivity in order to allow more light to enter the lens during periods of low-light to ensure the best possible image. An infrared-cut filter switches the camera from full colour to black and white video, which when used in conjunction with infrared illumination (sold separately) allows round-the-clock monitoring and recording.
2-way audio means connected accessories such as microphones and speakers help build a security system with 2-way communication between surveillance rooms and the camera, ideal for issuing instructions or warnings. Additional recording is available using the on-board MicroSD card slot and also a Direct-to-Storage feature for more localised recording without the need of external storage such as NVRs.
Please note: this camera does not come with a power supply. Please select if required.
Key features & benefits of IQeye Alliance-pro IQA35NE-B6
- 5 megapixel sensor captures high-quality video at up to 10 frames per second
- Low-power Power over Ethernet connection powers the camera at less than 4W as well as providing a network connection, resulting in an economical and eco-friendly security solution
- Lightgrabber II feature increases camera sensitivity to capture more light during difficult lighting conditions and ensure the best possible image
- Two-way audio capability creates a communication link between people in the camera's field of view and control rooms, with option microphone and speakers
- Day/night mode allows for round-the-clock surveillance, using an infrared-cut filter which switches from full colour to monochrome to ensure continuous visual quality when used in conjunction with infrared illumination (sold separately)
- On-board MicroSD card slot (card sold separately) and Direct-to-Storage feature allow for more localised recording, helping to save on external recording devices
Typical applications of IQeye Alliance-pro IQA35NE-B6
The robust vandal-resistant housing of the IQeye Alliance-pro IQA35NE-B5 makes it an ideal choice for monitoring outdoor locations in areas where vandalism may occur, including loading bays, train stations, schools, university campuses, shop entrances and for stadium surveillance.
Accessories for IQeye Alliance-pro IQA35NE-B6
Included:
- IQeye Alliance-pro IQA35NE-B6 outdoor IP camera (IQA35NE-B6)
- B6 Wide Angle Lens
- Installation CD
- Back Box (IQAE-BOX)
- Wall Mount Adaptor (IQA-WM)
- Pole Mount Adaptor (IQ800-PMA)
Camera | |
| Environment: | outdoor |
| Type: | dome camera |
| Sensor: | 5 megapixel 1/3" CMOS sensor |
| Lens: | B5 wide angle lens (3-13mm); 1/2.5" M14, F1.4; viewing angle: 27° - 76° |
| Audio: | two-way audio using G.711 compression (PCM 8 kHz) |
| Power: | Power over Ethernet (802.3af) Class 1 |
Video | |
| Resolution: | 2560x1920 (maximum) |
| Compression: | H.264 and MJPEG |
| Frame-rate: | up to 10 fps |
| Bandwidth control: | simultaneous H.264 & MJPEG streaming |
| Day/night: | yes (IR range: 800–940 nm) |
| Minimum illumination: | colour: 0.3 lux; black and white: <0.05 lux |
| Imaging: | shutter speed: 1/20000; saturation, contrast, brightness, sharpness, Lightgrabber II |
Viewing, detection & recording | |
| Simultaneous users: | up to 8 local or remote users using IQaccess application |
| Alarm detection: | motion detection (user configurable) |
| External alarm inputs and outputs: | 1 input, 1 output |
| Recording triggers: | motion detection, external device |
| On-camera recording: | Micro SD (Class 6+) |
| Recording software included: | on-camera IQaccess application |
Compatible recording platforms (not included) | |
| Software: | Milestone XProtect, IQeye IQrecorder |
Connections: | |
| Power: | Power over Ethernet (802.3af) Class 1; 24V AC, 12-24V DC |
| Network: | RJ45 10Base-T/100Base-TX Ethernet with PoE support |
| Physical I/O: | 4-pin push-in terminal block for 1 input, 1 output |
| Audio: | terminal block for Mic/Line in, Line out; terminal block for speaker output |
Other: | |
| Dimensions: | 146.2mm(W) x 137.6mm(H) |
| Weight: | 1186g |
| Colour: | white with black dome |
| Warranty: | 5 year manufacturer warranty |
| Mounting methods: | ceiling mount |
| Operating temperatures: | -20 – 50°C |
| Power consumption: | <3.4W (typical) |
| Protocols supported: | TCP/IP, HTTP, HTTPS, DHCP, UDP, RTP, RTSP, DNS, ARP, ICMP, NTP, UPnP, ZeroConf, APIPA, UDP multicast, SNMP, FTP, SMTP, Telnet, CIFS |
| Security: | secure multi-level password protection |
| System integration: | ONVIF, PSIA, IQfinder, IQmanager, IQsentry, IQevent, Direct-to-Storage |
| ONVIF compliant: | yes |