Skip to main content
Zoom the image with the mouse

| IQA32NE-B5

IQeye Alliance-pro IQA32NE-B5 outdoor IP camera with HD1080p resolution, low-power PoE

Free delivery on mainland UK and most EU countries. Check delivery charges to where you are.
Hurry! Only left
 

This product is discontinued, an alternative model is the Axis M3205-LVE

Overview of IQeye Alliance-pro IQA32NE-B5

Part of the IQeye Alliance-pro range of IP cameras, the IQA32NE-B5 is an outdoor surveillance dome with a vandal-resistant housing to help protect against attempts to damage the camera as well as harsh weather conditions. A 2 megapixel sensor allows the camera to record video in clear and crisp HD1080p resolution, ideal for capturing details which may be essential for identification.

The IQA32NE-B5 consumes less than 4 Watts using Power over Ethernet, making for an eco-friendly surveillance solution. A number of built-in features allow the camera to operate meaningfully around the clock, including an infrared-cut filter to switch between colour and black and white video when used with infrared illumination (sold separately). IQinVision's Lightgrabber feature enables monitoring during low-light conditions by adjusting image sensitivity to allow more light to enter the camera.

Connect a microphone and speakers to the camera for communication between the camera and control room when utilising the built-in 2-way audio function; useful for issuing instructions or warnings. Additional storage is available through use of a Direct-to-Storage feature for recording onto local network devices, saving on recording devices, while an on-board MicroSD slot provides a more localised recording solution (card sold separately).

Please note: this camera does not come with a power supply. Please select if required.

Key features & benefits of IQeye Alliance-pro IQA32NE-B5

  • Captures video at HD1080p resolution using a 2 megapixel sensor, providing high-quality recording
  • Low-power Power over Ethernet connection helps to provide network connectivity as well as power the camera at less than 4W, providing an economical and eco-friendly security solution
  • 2-way audio allows for the connection of accessories such as speakers and microphones for communication between the camera and control room, ideal for when orders and warnings need to be issued between remote locations
  • Lightgrabber II feature helps to increase sensitivity during low-light conditions, allowing the camera to record continuously
  • Vandal-resistant housing helps protect the camera against harsh weather and attempts to vandalise the camera
  • Built-in MicroSD card slot provides an option for localised recording (card sold separately) while a Direct-to-Storage feature helps to record locally without need of an NVR

Typical applications of IQeye Alliance-pro IQA32NE-B5

The IQeye IQA32NE-B5 is ideally suited for outdoor surveillance, particularly in areas which may be prone to vandalism, including transport hubs, train stations, school and college grounds, business entrances, public parkways and for stadium security.

Accessories for IQeye Alliance-pro IQA32NE-B5

Included:

  • IQeye Alliance-pro IQA32NE-B5 outdoor IP camera (IQA32NE-B5)
  • B5 Wide Angle Lens
  • Installation CD
  • Back Box (IQAE-BOX)
  • Wall Mount Adaptor (IQA-WM)
  • Pole Mount Adaptor (IQ800-PMA)
Back To Top
 
Camera
Environment:outdoor
Type:dome camera
Sensor:2 megapixel 1/3" CMOS sensor
Lens:B5 wide angle lens (3-13mm); 1/3" M14, F1.4; viewing angle: 32° - 94°
Audio:two-way audio using G.711 compression (PCM 8 kHz)
Power:Power over Ethernet (802.3af) Class 1
Video
Resolution:1920x1080 (maximum)
Compression:H.264 and MJPEG
Frame-rate:up to 30 fps
Bandwidth control:simultaneous H.264 & MJPEG streaming
Day/night:yes (IR range: 800–940 nm)
Minimum illumination:colour: 0.2 lux; black and white: <0.05 lux
Imaging:shutter speed: 1/20000; saturation, contrast, brightness, sharpness, Lightgrabber II
Viewing, detection & recording
Simultaneous users:up to 8 local or remote users using IQaccess application
Alarm detection:motion detection (user configurable)
External alarm inputs and outputs:1 input, 1 output
Recording triggers:motion detection, external device
On-camera recording:Micro SD (Class 6+)
Recording software included:on-camera IQaccess application
Compatible recording platforms (not included)
Software:Milestone XProtect, IQeye IQrecorder
Connections:
Power:Power over Ethernet (802.3af) Class 1; 24V AC, 12-24V DC
Network:RJ45 10Base-T/100Base-TX Ethernet with PoE support
Physical I/O:4-pin push-in terminal block for 1 input, 1 output
Audio:terminal block for Mic/Line in, Line out; terminal block for speaker output
Other:
Dimensions:146.2mm(W) x 137.6mm(H)
Weight:1186g
Colour:white with black dome
Warranty:5 year manufacturer warranty
Mounting methods:ceiling mount
Operating temperatures:-20 – 50°C
Power consumption: <3.4W (typical)
Protocols supported:TCP/IP, HTTP, HTTPS, DHCP, UDP, RTP, RTSP, DNS, ARP, ICMP, NTP, UPnP, ZeroConf, APIPA, UDP multicast, SNMP, FTP, SMTP, Telnet, CIFS
Security:secure multi-level password protection
System integration:ONVIF, PSIA, IQfinder, IQmanager, IQsentry, IQevent, Direct-to-Storage
ONVIF compliant:yes
We're here to assist you
Speak to one of our experts, call us on 0151 633 2111