The IQA10SI IP camera is part of IQeye’s Alliance Series of network cameras which combine vandal-resistant protection in an unobtrusive fixed dome design.
Images are delivered at 640x480 VGA resolution at up to a smooth 30 images per second in lighting conditions as low as 0.2 lux. View remotely from a PC attached to the network/Internet or on a traditional monitor using the camera's analogue video output
Easy to install, the IQA10SI supports Power over Ethernet connectivity which allows the camera to be installed using a single standard network cable and its full 3-axis pivoting lens mechanism makes positioning the lens simple and straightforward.
Important: This camera does not include a power supply unless you have selected one from the options above.
An outdoor version is available: IQeye IQA10SE outdoor ready fixed dome network camera
IQeye IQA10SI - Key benefits:
- Economical fixed dome camera for high quality unobtrusive monitoring of exposed indoor areas prone to vandalism
IQeye IQA10SI - Key features:
- Vandal resistant design with a solid aluminium casing and impact resistant polycarbonate bubble
- MJPEG video compression allowing for maximum compatibility
- Maximum resolution 640x480 (VGA)
- Frame rates of up to 30 frames per second
- Power over Ethernet IEEE802.3af support allows the camera to be installed using a single network cable making installation quick, easy and cost effective
- Full 3-way axis gimble and unique pivoting shroud allows for simple lens adjustment and positioning
- Two analogue video outputs make installation easier and provides a means for output to a public viewing monitor
- SD memory card recording support built in to the camera
- Low light performance provides usable images at illumination as low as 0.2 lux using LIGHTGRABBER II technology
- Multi-camera view allows up to 9 simultaneous cameras to be simultaneously displayed on a single screen
- Privacy masking allows sensitive areas of an image to be masked from view
- Digital image cropping allows images to be reduced in size to remove sensitive areas, optimise bandwidth or emphasize an area of a scene
- Digital pan-tilt-zoom allows live or recording images to be manipulated with no moving parts
- Image and exposure settings allow for fine adjustment of image quality
- Multi-zone motion detection with masking and sensitivity adjustment
- Alarm management features allow notifications with images to be sent to a user when events are triggered by motion detection, external sensor input or periodic transfer
- IPcameo included which allows the creation of up to three independent streams from the main stream with their own resolution, sub-stream frame-rate and compression settings
- Recording software can be added to provide a full on-camera recording and playback solution without the need for a PC or server
IQeye IQA10SI - Typical applications:
- Designed for unobtrusive IP CCTV installations in exposed indoor environments prone to vandalism such as police stations, chopping centres, train stations etc.
IQeye IQA10SI - Key technical indicators:
- Compression format: MJPEG
- Image sensor: 1/3 inch progressive scan CMOS imaging sensor with dichroic infrared mirror
- Resolutions: Maximum 640x480 (VGA)
- Frame-rate: Up to 30fps
- Min. illumination: 0.2 lux using LIGHTGRABBER II
- Lens: 3.8mm varifocal lens, horizontal: 23° (narrow), 48° (wide)
- Power over Ethernet (PoE) 48V IEEE802.3af compliant
- Protocols supported: IP, TCP, UDP, ICMP, ARP, FTP, SMTP, DHCP, HTTP, RARP, BOOTP, SNMP, Telnet, TFTP
- Security: Security comprises of multi level password protection
- Construction: Vandal resistant aluminium body with impact resistant polycarbonate dome
- Operating temperatures: 0°C to 40°C (32°F to 104°F)
- Dimensions: (Diameter x Height) 145 x 97mm
- Weight: 0.78kg
IQeye IQA10SI - Connections:
- Network: RJ45 Ethernet connector (IEEE 802.3af PoE compliant)
- Analogue video out: 75ohm BNC connector
- Analogue installation setup port: RCA female
- SD Media Slot
- Alarm I/O: 4-pin screw terminal (pig tail), 1 input, 1 output
- Power supply: 2-pin captive terminal screw terminal (pig tail) No PSU supplied
IQeye IQA10SI - Accessories included:
- B3 Lens 2.5mm to 7mm Varifocal
- CD with installation guide and manual
IQeye IQA10SI - Additional items you may want to order with this camera:
- IQrecorder for an on-camera full recording and playback solution
Product data sheet: IQeye Alliance Series Network Camera (PDF 165k)
|