The Axis PoE Midspan allows Axis network cameras with PoE support to be powered without the use of a separate external power supply, helping to save on installation costs. By injecting power and data into the network camera through a single cat5 cable, the 1-port midspan is useful for when IP cameras need to be installed in areas which may not have power sockets nearby.

Note: for IP cameras without PoE support, a separate splitter may be required

Key features and benefits of the Axis Power over Ethernet Midspan (1-port)

Allows cameras to receive both power and network connectivity over a single cable
Useful for setting up cameras in areas where traditional power outlets might not be available or are difficult to install

Connections for the Axis Power over Ethernet Midspan (1-port)

Power: AC input
Data input connector: RJ-45
Data and power output connector: RJ-45

Key technical features for the Axis Power over Ethernet Midspan (1-port)

Camera
Number of ports:	1
Data rates:	10/100 Mbps
Power input:	AC input voltage: 90-264V; frequency: 47-63 Hz; input current: 0.5A at 110-220V AC
Power output:	48V DC (max: 15.4 W/port)
Power standards:	IEEE 802.3 / IEEE 802.3af, DTE Power via MDI
Connectors:	shielded RJ-45, EIA 568A and 568B
Network cables:	shielded cat5 Ethernet cable
Wiring:	Mode B; data provided over pairs 1/2 and 3/6, power over spare pairs 4/5(+) and 7/8(-)
Operating temperatures:	0 – 40°C
Mounting methods:	wall or shelf mount
Dimensions:	31mm (H) x 60mm (W) x 145mm (D)
Weight:	450g
Compatible products:	cameras: 211, 211W, 212/V PTZ, 221, M1054, M11 series, P13 series, P5512, P5512-E, Q1755, Q1910, Q1921, P1343-E, P1344-E, P1346-E, P1347-E, Q1755-E, Q1910-E, Q1921-E; encoders: 247S, M7001, Q7401, P8221, P7701; illuminators: T90A01, T90C20

Documentation for the Axis Power over Ethernet Midspan (1-port)

Product Specification: Axis Power over Ethernet Midspan