HomeDiscontinued ProductsIQA30NE-B5
IP Camera Finder - select features to find the IP camera best suited to your security camera needs
IP camera brands
IP camera types
More brands
Recording & Storage
PoE & Transmission
Encoding & Decoding
Accessories
Deals
Other
 

IQeye Alliance-pro IQA30NE-B5 outdoor dome IP security camera with day/night, vandal-resistant housing and PoE

IQA30NE-B5
IQeye Alliance-pro IQA30NE-B5 outdoor dome IP security camera with day/night, vandal-resistant housing and PoE
Enlarge		  
Discontinued  

Overview of IQeye Alliance-pro IQA30NE-B5

This product is no longer available. For an alternative please see LILIN LD6122EX outdoor IP67-rated network dome camera.

The IQeye Alliance-pro IQA30NE-B5 is a compact dome IP security camera that is ideal for outdoor surveillance, with a robust vandal-resistant case to protect against harsh weather and vandalism. 2-way audio capability allows the connection of accessories such as speakers and microphones to enable communication between the camera and control rooms, ideal for when instructions or warnings need to be communicated.

IQinVision's built-in Lightgrabber technology adjusts camera sensitivity in response to low light levels, ensuring that the best possible image is captured. A built-in infrared-cut filter allows the camera to switch between full colour and monochrome video to allow round-the-clock surveillance when used in conjunction with infrared illumination (sold separately).

An on-board MicroSD card slot provides a localised recording solution, while the Direct-to-Storage feature allows for recording onto a local network device, helping to save on external recording equipment. The camera consumes less than 4 Watts of power through its Power over Ethernet connection.

Please note: this camera does not come with a power supply. Please select if required.

Key features & benefits of IQeye Alliance-pro IQA30NE-B5

  • Full integrated IP66-rated outdoor dome with vandal-resistance
  • Power over Ethernet support allows the camera to receive power and network connectivity using a single cable, and the camera is powered using less than 4W, providing a cost-effective and eco-friendly security solution
  • Lightgrabber feature helps increase camera sensitivity during low-light periods
  • Direct-to-Storage helps to save on recording devices, while an on-board MicroSD card slot provides a more localised recording solution (card sold separately)
  • Two-way audio allows accessories such as microphones and speakers to be connected to the camera, providing a means of communication between control rooms and the camera

Typical applications of IQeye Alliance-pro IQA30NE-B5

The IQeye IQA30NE-B5 is ideally suited to outdoor surveillance, and can be used to monitor locations which may be prone to vandalism including school grounds, public parkways, car parks, transport hubs, railway stations and warehouses.

Accessories for IQeye Alliance-pro IQA30NE-B5

Included:

  • IQeye Alliance-pro IQA30NE-B5 outdoor IP camera (IQA30NE-B5)
  • B5 Wide Angle Lens
  • Installation CD
  • Back Box (IQAE-BOX)
  • Wall Mount Adaptor (IQA-WM)
  • Pole Mount Adaptor (IQ800-PMA)
Camera
Environment:outdoor
Type:dome camera
Sensor:0.3 megapixel 1/3" CMOS sensor
Lens:wide: B5 wide angle lens (3-13mm); 1/3" M14, F1.4; viewing angle: 27° - 89°
Audio:two-way audio using G.711 compression (PCM 8 kHz)
Power:Power over Ethernet (802.3af) Class 1
Video
Resolution:720x480 (maximum)
Compression:H.264 and MJPEG
Frame-rate:up to 30 fps
Bandwidth control:simultaneous H.264 & MJPEG streaming
Day/night:yes (IR range: 800–940 nm)
Minimum illumination:colour: 0.1 lux; black and white: <0.05 lux
Imaging:shutter speed: 1/12000; saturation, contrast, brightness, sharpness, Lightgrabber II
Viewing, detection & recording
Simultaneous users:up to 8 local or remote users using IQaccess application
Alarm detection:motion detection (user configurable)
External alarm inputs and outputs:1 input, 1 output
Recording triggers:motion detection, external device
On-camera recording:Micro SD (Class 6+)
Recording software included:on-camera IQaccess application
Compatible recording platforms (not included)
Software:Milestone XProtect VMS suite, IQeye IQrecorder
Connections:
Power:Power over Ethernet (802.3af) Class 1; 24V AC, 12-24V DC
Network:RJ45 10Base-T/100Base-TX Ethernet with PoE support
Physical I/O:4-pin push-in terminal block for 1 input, 1 output
Audio:terminal block for Mic/Line in, Line out; terminal block for speaker output
Other:
Dimensions:146.2mm(W) x 137.6mm(H)
Weight:1186g
Colour:white with black dome
Warranty:5 year manufacturer warranty
Mounting methods:ceiling mount
Operating temperatures:-20 – 50°C
Power consumption: <3.4W (typical)
Protocols supported:TCP/IP, HTTP, HTTPS, DHCP, UDP, RTP, RTSP, DNS, ARP, ICMP, NTP, UPnP, ZeroConf, APIPA, UDP multicast, SNMP, FTP, SMTP, Telnet, CIFS
Security:secure multi-level password protection
System integration:ONVIF, PSIA, IQfinder, IQmanager, IQsentry, IQevent, Direct-to-Storage
ONVIF compliant:yes

Documentation for IQeye Alliance-pro IQA30NE-B5
This item has been discontinued