HomeDiscontinued ProductsIQA33NI-B5
IP Camera Finder - select features to find the IP camera best suited to your security camera needs
IP camera brands
IP camera types
More brands
Recording & Storage
PoE & Transmission
Encoding & Decoding
Accessories
Deals
Other
 

IQeye Alliance-pro IQA33NI-B5 indoor megapixel IP CCTV camera with 2-way audio, day/night, MicroSD

IQA33NI-B5
IQeye Alliance-pro IQA33NI-B5 indoor megapixel IP CCTV camera with 2-way audio, day/night, MicroSD
Enlarge		  
Ready to buy?
Price: Discontinued  
 
This item has been discontinued

Overview of IQeye Alliance-pro IQA33NI-B5

This product is no longer available. For an alternative please see Axis P3354 indoor day/night IP dome camera with HD 720p resolution.

With a 3 megapixel sensor that can capture video at up to 16 frames per second with exceptional image quality, the IQeye Alliance-pro IQA33NI IP camera is ideal for surveillance of locations where detail is key. The camera itself is housed within an IP66-rated dome which can be mounted in both indoor and outdoor locations, providing protection against harsh environmental conditions and vandalism.

The camera is able to operate using less than 4W when used with Power over Ethernet to provide network connectivity and power to the unit, resulting in a cost-effective and eco-friendly surveillance solution. Additional storage is available using a MicroSD card and its Direct-to-Storage feature allows for localised recording without the need for an NVR.

A number of features help the camera to continue recording in difficult lighting conditions, IQinVision's Lightgrabber technology increases camera sensitivity in order to capture the best image possible, whilst a built-in infrared-cut filter switches from full colour to black and white video to allow for round-the-clock recording (infrared lighting required).

Please note: this camera does not come with a power supply. Please select if required.

Key features & benefits of IQeye Alliance-pro IQA33NI-B5

  • 3 megapixel resolution can capture video at up to 16fps, providing high-quality recording
  • Lightgrabber II feature increases camera sensitivity during periods of low-light to help capture the best possible image in difficult conditions
  • IP66-rated vandal-resistant dome provides protection against attempts to tamper with the camera as well as harsh weather conditions
  • 2-way audio compatible, allowing accessories such as microphones and speakers to be connected in order to provide two-way communication between those in the camera view and remote locations
  • Day/night mode using a built-in infrared-cut filter allows switching from full colour to monochrome to allow recording to continue at night when used with infrared lighting (sold separately)
  • Low-power Power over Ethernet connection can power the camera using under 4W, providing an eco-friendly and cost-effective security solution

Typical applications of IQeye IQA33NI-B5

The IQeye Alliance-pro IQA33NI-B5 can be used to monitor both indoors and outdoors. A vandal-resistant housing allows the camera to provide continuous surveillance in areas prone to vandalism, including train stations, transport hubs, schools, universities, warehouses, stadium surveillance and public parkways.

Accessories for IQeye Alliance-pro IQA33NI-B5

Included:

  • IQeye Alliance-pro IQA33NI-B5 IP camera (IQA33NI-B5)
  • B5 Wide Angle varifocal lens
  • Installation CD
  • Back Box (IQAE-BOX)
  • Wall Mount Adaptor (IQA-WM)
  • Pole Mount Adaptor (IQ800-PMA)
Camera
Environment:indoor
Type:dome camera
Sensor:3.6 megapixel 1/3" CMOS sensor
Lens:B5 wide angle lens (3-13mm); 1/3" M14, F1.4; viewing angle: 26° - 71°
Audio:two-way audio using G.711 compression (PCM 8 kHz)
Power:Power over Ethernet (802.3af) Class 1
Video
Resolution:2560x1440 (maximum) @ 3.6MP; 2048x1536 (maximum) @ 3.1MP
Compression:H.264 and MJPEG
Frame-rate:up to 16 fps @ 3.6MP; up to 20fps @ 3.1MP
Bandwidth control:simultaneous H.264 & MJPEG streaming
Day/night:yes (IR range: 800–940 nm)
Minimum illumination:colour: 0.3 lux; black and white: <0.05 lux
Imaging:shutter speed: 1/20000; saturation, contrast, brightness, sharpness, Lightgrabber II
Viewing, detection & recording
Simultaneous users:up to 8 local or remote users using IQaccess application
Alarm detection:motion detection (user configurable)
External alarm inputs and outputs:1 input, 1 output
Recording triggers:motion detection, external device
On-camera recording:Micro SD (Class 6+)
Recording software included:on-camera IQaccess application
Compatible recording platforms (not included)
Software:Milestone XProtect, IQeye IQrecorder
Connections:
Power:Power over Ethernet (802.3af) Class 1; 24V AC, 12-24V DC
Network:RJ45 10Base-T/100Base-TX Ethernet with PoE support
Physical I/O:4-pin push-in terminal block for 1 input, 1 output
Audio:terminal block for Mic/Line in, Line out; terminal block for speaker output
Other:
Dimensions:146.2mm(W) x 98.6mm(H) – 137.6mm (w/backbox)
Weight:746g
Colour:white with black dome
Warranty:5 year manufacturer warranty
Mounting methods:ceiling mount
Operating temperatures:-20 – 50°C
Power consumption: <3.4W (typical)
Protocols supported:TCP/IP, HTTP, HTTPS, DHCP, UDP, RTP, RTSP, DNS, ARP, ICMP, NTP, UPnP, ZeroConf, APIPA, UDP multicast, SNMP, FTP, SMTP, Telnet, CIFS
Security:secure multi-level password protection
System integration:ONVIF, PSIA, IQfinder, IQmanager, IQsentry, IQevent, Direct-to-Storage
ONVIF compliant:yes

Documentation for IQeye Alliance-pro IQA33NI-B5
This item has been discontinued