Veracity | VCS-8P2-MOB
Veracity Camswitch Mobile 8 Plus VCS-8P2-MOB 10-port Ethernet switch with PoE support IEEE802.3af / IEEE802.3at
£433.00
£519.60
inc VAT
Free delivery on mainland UK and most EU countries Check delivery charges to where you are.
Vehicle-ready mobile 10-port ethernet switch designed to power up to 10 devices with up to 60 watts of power.
- 10-port unmanaged Fast Ethernet switch
- Compliant with IEEE802.3af/at standards
- Converts battery power into PoE supply
Overview of the Veracity VCS-8P2-MOB Camswitch Mobile 8 Plus
The Veracity Camswitch Mobile 8 Plus fast Ethernet switch provides 10 network ports, 8 of which are PoE capable (PoE 802.3af / 802.3at). The VCS-8P2-MOB integrates a 10-port Ethernet switch capable of converting an 8 to 40-volt DC supply into an 80-watt IEEE 802.3af/at compliant power source, suitable for converting 12 and 24-volt power supplies in buses and trains to PoE power (battery circuit fuse required).
The rugged VCS-8P2-MOB is easy and neat to install using the included wall mount clips and provides auto-configuration for speed (10BASE-T or 100BASE-T) and duplex.
Total power budget
| 24V input: | 80 watts |
| 12V input: | 80 watts (reduce to 65 watts for max 30°C temperature rise above ambient) |
| Less than 12V input: | 60 watts (reduce to 50 watts if voltage can drop below 10V) |
POE power conversion produces heat; the above limits are for horizontal mounting with ventilation. Installation in enclosed spaces will cause additional heating and power limiting.
4 port version: Veracity VCS-4P1-MOB Camswitch Mobile 4 Plus.
Key features & benefits
- Unmanaged 10-port fast Ethernet switch (10BASE-T / 100BASE-T) with 8 PoE ports (802.3af / 802.3af)
- Speed and duplex are automatically configurable
- Unit is compact and rugged for ideal installation in trains and buses
- PoE is supplied through the switch by converting power from a battery
Typical applications
The Veracity VCS-8P2-MOB Camswitch Mobile 8 Plus switch is ideal for the installation of IP video cameras in temporary, battery or solar powered and other low voltage applications such as transport, including trams, buses, trains and coaches.
Back To TopKey technical features of the Veracity VCS-8P2-MOB Camswitch Mobile 8 Plus
Power input | |
| Connector: | detachable screw terminal |
| Voltage: | 8.5 - 40V (minimum startup voltage is 10.5V, supports engine cranking and reduce overdischarge) DC only (contact us for 24V AC applications) |
| Fusing: | the use of an external fuse is recommended. Rating: 5 amps for 24V DC or 10 amps for 12V DC supply, slow blow type |
PoE outputs | |
| PoE standard: | IEEE 8023.af / IEEE 802.3at compatible, not isolated from DC input; for use in closed system transport applications; connected devices must be IEEE compliant, Veracity enhanced POE supports maximum efficiency and range |
Ethernet interface | |
| Connector: | RJ45, 5-port unmanaged 10/100 switch |
| Rates: | 10BASE-T or 100BASE-T and duplex, auto-configuring for speed |
| Cable: | straight through or crossover Cat 5, Cat 5e or Cat 6 patch, VLAN trunking |
LED indicators | |
| Green - POE ports: | constant: POE enabled, off: no POE requested |
| Green - non POE ports: | constant power: ok, off: no power |
| Yellow: | constant: Ethernet ok, blink: network activity |
Physical/environmental | |
| Dimensions: | L 110mm/131mm with side clips, W 100mm including connectors, H 40mm |
| Weight: | 3.5kg |
| Warranty: | 5 years |
| Mounting: | 5mm mounting holes on 122mm centres |
| Operating temperatures: | -10°C to + 50°C |
| Compliance: | CE, FCC, RoHS |