Veracity | VCS-4P1-MOB
Veracity Camswitch Mobile 4 Plus VCS-4P1-MOB 5-port Ethernet switch with PoE support IEEE802.3af / IEEE802.3at
£261.00
£313.20
inc VAT
Free delivery on mainland UK and most EU countries Check delivery charges to where you are.
- 5-port unmanaged Fast Ethernet switch
- Converts battery power into PoE supply
- Compliant with IEEE802.3af/at standards
Overview of the Veracity VCS-4P1-MOB Camswitch Mobile 4 Plus
The Veracity Camswitch Mobile 4 Plus is a fast Ethernet switch with 5 network ports. 4 ports are capable of Power-over-Ethernet (PoE 802.3af / 802.3at) whilst 1 non-PoE port provides an additional network connection. The Camswitch Mobile 4 Plus integrates a 5 port Ethernet switch with capability to convert an 8 to 40-volt DC supply into an 80-watt IEEE 802.3af/at compliant power source, ideal for converting 12 and 24-volt bus, train and car power supplies to PoE power (battery circuit fuse is required).
Compact and rugged, the VCS-4P1-MOB also comes with adjustable wall mount clips for easy, neat installation and auto-configuration for speed (10BASE-T or 100BASE-T) and duplex.
Total power budget
| 24V input: | 80 watts |
| 12V input: | 80 watts (reduce to 65 watts for max 30°C temperature rise above ambient) |
| Less than 12V input: | 60 watts (reduce to 50 watts if voltage can drop below 10V) |
POE power conversion produces heat; the above limits are for horizontal mounting with ventilation. Installation in enclosed spaces will cause additional heating and power limiting.
8 port version: Veracity VCS-8P2-MOB Camswitch Mobile 8 Plus.
Key features & benefits
- 5-port unmanaged fast Ethernet switch (10BASE-T / 100BASE-T) with 4 PoE ports (802.3af / 802.3af)
- Auto-configuration of speed and duplex
- Rugged and compact unit ideal for installation in transport applications
- Converts battery power into PoE supply, ideal for temporary and mobile applications such as transport and solar-powered systems
Typical applications
The Veracity VCS-4P1-MOB Camswitch Mobile 4 Plus switch is ideal for the installation of IP video cameras in battery or solar powered, temporary and other low voltage applications such as transport, including buses, coaches, trains and trams.
Back To TopKey technical features of the Veracity VCS-4P1-MOB Camswitch Mobile 4 Plus
Power input | |
| Connector: | detachable screw terminal |
| Voltage: | 8.5 - 40V (minimum startup voltage is 10.5V, supports engine cranking and reduce overdischarge) DC only (contact us for 24V AC applications) |
| Fusing: | the use of an external fuse is recommended. Rating: 5 amps for 24V DC or 10 amps for 12V DC supply, slow blow type |
PoE outputs | |
| PoE standard: | IEEE 8023.af / IEEE 802.3at compatible, not isolated from DC input; for use in closed system transport applications; connected devices must be IEEE compliant, Veracity enhanced POE supports maximum efficiency and range |
Ethernet interface | |
| Connector: | RJ45, 5-port unmanaged 10/100 switch |
| Rates: | 10BASE-T or 100BASE-T and duplex, auto-configuring for speed |
| Cable: | straight through or crossover Cat 5, Cat 5e or Cat 6 patch |
LED indicators | |
| Green - POE ports: | constant: POE enabled, off: no POE requested |
| Green - non POE ports: | constant power: ok, off: no power |
| Yellow: | constant: Ethernet ok, blink: network activity |
Physical/environmental | |
| Dimensions: | L 110mm/131mm with side clips, W 100mm including connectors, H 40mm |
| Weight: | 2.9kg |
| Warranty: | 5 years |
| Mounting: | 5mm mounting holes on 122mm centres |
| Operating temperatures: | -10°C to + 50°C |
| Compliance: | CE, FCC, RoHS |