The PS20D630 is an outdoor-ready amplified horn speaker suitable for IP cameras which have an audio line-out. This enables the camera user to communicate directly with people at the camera's location e.g. issue instructions to staff members, make announcements or scare off intruders (note: to hear sounds from the camera's location a microphone would still be required).
Designed for heavy-duty industrial use the PS20D630 is IP65-rated and can be installed in any indoor or outdoor location without any additional protection. It is finished in a white powder coating and comes with a universal “U” bracket for easy mounting.
With a built-in amplifier this horn loudspeaker requires no additional equipment, it can simply be plugged into the camera making it ideal for areas of IP CCTV surveillance where there is a requirement for communication with people close to the camera.
AVSL PS20D630 - Key benefits:
- A self-contained solution for achieving direct audio from your IP camera. This horn loudspeaker incorporates a pre-amp and is fully weatherproof with an IP65 rating. Simply power the speaker with the included power supply, plug the camera in and install in any indoor or outdoor location
AVSL PS20D630 - Key features:
- Built-in 20W power amplifier utilising the latest Class “D” technology which allows power amplifiers to operate with a much higher efficiency with little power loss or heat generation
- Weatherproof to IP65 rating. Can be placed in any indoor or outdoor location without any additional protection
- Optimised for transmission of human speech
- Adjustable volume control for site variances
- Transformer balanced input allowing long cable runs where required
AVSL PS20D630 - Typical applications:
- Use in areas of IP CCTV security where there is a requirement to issue instructions/warnings to people in areas of town/city security, car parks or issue instructions to staff members in retail environments, warehouses, factories, construction sites, health & safety etc.
AVSL PS20D630 - Key technical indicators:
- Input level/impedance: 1V p-p @ 1K ohm (for maximum amplifier output)
- Supply voltage: 18V DC, regulated @ 1100mA max.
- Signal gain: 12, 18, 24 or 36db (factory preset to 36db)
- Volume adjustment: internal volume control
- Effective frequency range: 250-10,000Hz
- Effective range of output: 50m
- Sound pressure level: Up to 120dB (dependent on signal input level & volume control setting)
- Termination: 2m flying lead, 3.5mm jack cable supplied
- Mounting: Stainless steel universal “U” bracket supplied
- IP rating: IP65
- Colour: White
- Operating temperatures: -20°C to 55°C (-4°F to 131°F)
- Weight: 2.4kg (5.29lb)
- Dimensions: (HxWxD) 227 x 285 x 277mm
AVSL PS20D630 - Connections:
- 2m flying lead for power and audio connection
- 3.5mm jack plug cable supplied
- Terminal block inside the loudspeaker for alternative power connection
AVSL PS20D630 - Accessories included:
- 18V DC, switch-mode power adapter (90-280 VAC @ 50/60Hz)
- Universal stainless steel “U” bracket
- 3.5mm jack cable supplied for camera connection